3M MetPak HSHM Press-Fit Header
2 mm Type B22, 110 Signal Contacts, 5 Rows, Straight HSHM Series
Up to 5 Gb/s data rates
Low crosstalk at high frequencies
50/100 (single-ended/differential) impedance
Modular/scalable format IEC 61076-4-101
Press-fit headers and receptacles
63 mated lines per linear inch
End-to-end stackable with 5 row 3M MetPak CP2,
HM, and HSHM headers
Mates with 3M MetPak HSHM sockets
See the Regulatory Information Appendix (RIA) in
the RoHS compliance section of
www.3mconnector.com for compliance information
Date Modified: November 10, 2010 TS-2248-C
Sheet 1 of 3
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0
Color:
Material:
Copper Alloy
Plating: See Ordering information
Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [75 g] Shield
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [22 g] Shield
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [20 g] Shield
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [0.062 in] Shield
Mate/Unmate Cycles: 250
Application: This module is not suitable for stand-alone use (Refer to IEC-61076-4-101)
Electrical:
Data Rate: 5 Gb/s
Characteristic Impedance:
50 Single-ended, 100 Differential
Current Rating (Fully Loaded): 1 A @ 70 C Signal
4
Insulation Resistance:
10 M @ 100 V
DC
Withstanding Voltage: 750 V
RMS
Environmental
Temperature Rating: -55 C to 125 C
UL File No.: E68080
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions
3M MetPak HSHM Press-Fit Header
2 mm Type B22, 110 Signal Contacts, 5 Rows, Straight HSHM Series
mm
(Inch)
Tolerance Unless Noted
0 0.0 0.00
mm 3 0.3 0.13
[ ] Dimensions for
Reference Only
Denotes shield column (tail only)
Omitted for the row differential part
Coaxial column differential and stripline configuration
Shown with protective cap
Dim. A = Pin mounting length
Dim. B = Shield tail length
Dim. C = Pin tail length
Row differential and stripline configuration
Shown with protective cap
Caps to be removed after press-fit installation process
Ordering Information
(rows F and Z not loaded)
HSHM-H110BX-5CPX- XXXXX
Plating m [ ]:
TG30 = 0.76 [30] Min. Au Contact Area
High Speed Option:
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
4 = Coaxial, column differential and stripline (75 )
1.27 [50] Min. Ni All over
applications
Standard Option
5 = Row differential applications
TG30L = 0.76 [30] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Typically higher make order quantities as compared to TG30.
Tail Length:
TG50 = 1.27 [50] Min. Au Contact Area, Lubricated
1 = 4.4 mm pin and 3.5 mm shield
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
2 = 2 mm pin and 2 mm shield
Non-Standard Option (Available with longer lead times and higher
make order quantities, MOQ)
TS-2248-C
Sheet 2 of 3
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions