3M MetPak HSHM Press-Fit Socket
2 mm Type B22, 110 Signal Contacts, 5 Rows, Right Angle HSHM Series
Up to 5 Gb/s data rates
Low crosstalk at high frequencies
50/100 (single-ended/differential) impedance
Modular/scalable format IEC 61076-4-101
Press-fit headers and receptacles
63 mated lines per linear inch
Dual beam contact construction for high reliability
End-to-end stackable with 5 row 3M MetPak CP2,
HM, and HSHM sockets
Mates with 5 row 3M MetPak CP2, HM, and
HSHM headers
See the Regulatory Information Appendix (RIA) in
the RoHS compliance section of
www.3mconnector.com for compliance information
Date Modified: October 12, 2010 TS-2247-C
Sheet 1 of 3
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0
Color:
Material:
Copper Alloy
Plating: See Ordering Information
Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [75 g] Shield
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [22 g] Shield
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [20 g] Shield
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [0.062 in] Shield
Mate/Unmate Cycles: 250
Application: This module is not suitable for stand-alone use
Electrical:
Data Rate: 5 Gb/s
Characteristic Impedance: 50 Single-ended, 100 Differential
Current Rating (Fully Loaded): 1 A @ 70 C Signal
4
Insulation Resistance: 10 M @ 100 V
DC
Withstanding Voltage: 750 V
RMS
Environmental
-55 C to 125 C
Temperature Rating:
UL File No.: E68080
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions
3M MetPak HSHM Press-Fit Socket
2 mm Type B22, 110 Signal Contacts, 5 Rows, Right Angle HSHM Series
mm
(Inch)
Tolerance Unless Noted
.0 .00
mm .1 .10
( ) Dimensions used for
Reference Only
Ordering Information
HSHM-S110BX-5AP1- XXXXX
Plating m [ ]:
TG30 = 0.76 [30] Min. Au Contact Area
High Speed Option:
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1 = Row differential applications
1.27 [50] Min. Ni All over
Standard Option
3 = 6th Row and +2 Row Grounding Applications
TG30L = 0.76 [30] Min. Au Contact Area, Lubricated
4 = Coaxial and column differential applications
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Typically higher make order quantities as compared to TG30.
TG50 = 1.27 [50] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Non-Standard Option (Available with longer lead times and
higher make order quantities, MOQ)
TS-2247-C
Sheet 2 of 3
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions