3M MetPak HSHM Press-Fit Socket 2 mm Type B22, 110 Signal Contacts, 5 Rows, Right Angle HSHM Series Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 (single-ended/differential) impedance Modular/scalable format IEC 61076-4-101 Press-fit headers and receptacles 63 mated lines per linear inch Dual beam contact construction for high reliability End-to-end stackable with 5 row 3M MetPak CP2, HM, and HSHM sockets Mates with 5 row 3M MetPak CP2, HM, and HSHM headers See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3mconnector.com for compliance information Date Modified: October 12, 2010 TS-2247-C Sheet 1 of 3 Physical Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0 Color: Material: Copper Alloy Plating: See Ordering Information Performance Mechanical: Normal Force (Nominal): 0.57 N 58 g Signal, 0.74 N 75 g Shield Engagement Force (Nominal): 0.32 N 33 g Signal, 0.22 N 22 g Shield Separation Force (Nominal): 0.20 N 20 g Signal, 0.20 N 20 g Shield Wipe (Nominal, Shortest Contact): 2.67 mm 0.105 in Signal, 1.57 mm 0.062 in Shield Mate/Unmate Cycles: 250 Application: This module is not suitable for stand-alone use Electrical: Data Rate: 5 Gb/s Characteristic Impedance: 50 Single-ended, 100 Differential Current Rating (Fully Loaded): 1 A 70 C Signal 4 Insulation Resistance: 10 M 100 V DC Withstanding Voltage: 750 V RMS Environmental -55 C to 125 C Temperature Rating: UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M MetPak HSHM Press-Fit Socket 2 mm Type B22, 110 Signal Contacts, 5 Rows, Right Angle HSHM Series mm (Inch) Tolerance Unless Noted .0 .00 mm .1 .10 ( ) Dimensions used for Reference Only Ordering Information HSHM-S110BX-5AP1- XXXXX Plating m : TG30 = 0.76 30 Min. Au Contact Area High Speed Option: 2.54 100 Min. SnPb Terminal Area (RIA C2 & E2 apply) 1 = Row differential applications 1.27 50 Min. Ni All over Standard Option 3 = 6th Row and +2 Row Grounding Applications TG30L = 0.76 30 Min. Au Contact Area, Lubricated 4 = Coaxial and column differential applications 2.54 100 Min. SnPb Terminal Area (RIA C2 & E2 apply) 1.27 50 Min. Ni All over Typically higher make order quantities as compared to TG30. TG50 = 1.27 50 Min. Au Contact Area, Lubricated 2.54 100 Min. SnPb Terminal Area (RIA C2 & E2 apply) 1.27 50 Min. Ni All over Non-Standard Option (Available with longer lead times and higher make order quantities, MOQ) TS-2247-C Sheet 2 of 3 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions