Specialty Terminals HT-752-250-32 High Temperature Female Flag Disconnect, Non-Insulated, Butted Seam Data Sheet Mates with Male Tab Product Wire Range Width (W ) Barrel Barrel Number (AWG)xLThickness Length I.D. H4T-752-250-32126-101.250 x 0.0306.505.2 0.09 Specifications Installation Information WARNING Wire Size: 16-14 AWG Copper Turn power off before installing or removing terminal. All electrical Barrel Seam: Butted work should be done according to appropriate electrical codes. Maximum Operating Temp: 900F (482C) Maximum Current: Same as Wire Terminal Material: Steel Plating: Nickel Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-450 (scissor style) hand tools. Barrel Crimp (Required)Engineering Specification Crimp-type female quick-slide connectors shall, The non-insulated, butted seam, high temperature electrically and mechanically, connect permanently to 0.250 female disconnect shall be nickel-plated steel, a pre-stripped end of a stranded copper wire, and have with a tongue for gripping a 0.250 wide x 0.030 or a tongue portion with fingers which grip a male 0.032 male tab, and a 0.26 long butted seam barrel disconnect in a separable, reusable manner, forming a positioned across the closed end of the tongue and quick connect wiring termination. sized for a specified (16-14 AWG) wire range. 3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0713-9-A