3M Mini D Ribbon (MDR) Connectors .050 Solder Plug Connector - Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Solder cup termination requires no special tooling Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction Contacts: 14, 20, 26, 36, 40 and 50 RoHS* compliant version available TS-0669-09 Date Modified: May 25, 2005 Sheet 1 of 2 Physical Insulation Material: Glass Reinforced Polyester (PCT) Flamability: UL 94V-0 Color: Black Contact Material: Copper Alloy (C521) Plating Underplating: 80 (2.0 m) Nickel Wiping Area: Gold (see ordering information) Solder Area: Gold (RoHS compliant) or Tin-Lead (see ordering information) Shroud Material: Steel Plating: Nickel Wire Accomodation: 24, 26, 28 & 30 AWG Marking: 3M Logo and Part Number Electrical Current Rating: 1 A 8 Insulation Resistance: > 1 10 at 500 VDC Withstanding Voltage: 500 Vrms for 1 minute Environmental Temperature Rating: -55C TO +105C Solder Process: 360C max for 10 sec. max * RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic EquipmentRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M s knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E68080 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Connectors .050 Solder Plug Connector - Shielded 101 Series Contact Dimensions Quantity A B C 14 .300 7.62 .54 13.8 .72 18.2 20 .450 11.43 .69 17.6 .87 22.0 26 .600 15.24 .85 21.5 1.02 25.8 36 .850 21.59 1.09 27.8 1.27 32.2 40 .950 24.13 1.19 30.3 1.37 34.7 50 1.200 30.48 1.44 36.7 1.62 41.1 20, 36 & 40 Position 14, 26 & 50 Position .100 .09 Last Position 2.54 2.3 .050 Last Position .09 1.27 2.3 Position .20 5.1 .20 Position 1 5.1 Position 3 .11 Position 2 2.9 .76 19.3 .50 .26 12.7 6.6 C Position 2 Position 1 Position 3 .30 .36 7.5 9.1 Inch .050 1.27 mm A Last Position Tolerance Unless Noted B Position .0 .00 .000 inch .1 .01 .005 D im ensions for R eference Only Ordering Information 101XX-3000-XX C = 30 .76 m min gold wiping interface E = 20 .5 m min gold wiping interface Contact Quantity (See Table) P = Gold flash solder cup (RoHS compliant) V = Tin-lead solder cup TS-0669-09 Note: This solder plug connector must be used with only 3M Non-Shielded Shell Kits 103XX-52FO-008 Series and 103XX-52A0-008 Series. Sheet 2 of 2 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call