Scotchlok Terminals L M18BC, M14BC, M10BC Butt Connector, Non-Insulated, Seamless Data Sheet Product Wire Range Barrel Barrel Number (LAWG) Thickness Length I.D. M818BC 232-1 01.6 08.03 02.2 0.06 M414BC 166-1 01.6 00.03 05.3 0.09 M010BC 112-1 08.8 08.03 02.3 0.14 Installation Information WARNING CANADIAN STANDARDS UNDERWRITERS Turn power off before installing or removing terminal. All electrical ASSOCIATION LABORATORIES work should be done according to appropriate electrical codes. STANDARD NO. 22.2 STANDARD NO. UL 486C NO. 0, 65 3M FILE NO. E23438 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended Wire Size: See Table Above 3M crimp tool: TH-440, TH-450 (scissor style) or Barrel Seam: Seamless TR-490 (ratchet style) hand tools. Maximum Current: Same as Wire Terminal Material: ETP Copper Terminal Plating: Tin Barrel Crimp (Required)Engineering Specification Crimp-type terminals shall, electrically and mechanically, The non-insulated, seamless butt connector shall be tin connect permanently to the pre-stripped end of two plated, annealed copper, having a double-length, round stranded copper wires. seamless barrel with a center stop, sized for a specified (AWG) wire range (22-18, 16-14, 12-10). The connector line shall offer barrel variations in wire (AWG) size (22-18, 16-14, 12-10) and construction (non- insulated brazed seam, vinyl insulated butted seam, nylon insulated seamless, etc...). The connector line shall have regulatory agency coverage (UL Listing, CSA Certification). The connectors shall be marked with the wire range and manufacturers symbol ( ). 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.