Page 1 of 1 Heat Shrink Tubing HDT-A Thick Wall Adhesive Coated Tubing Data Sheet Product Description HDT-A is a thick wall polyolefin tubing. The toughness and weatherability of the tubing make it well suited for exposed applications. HDT-A is supplied with a specially designed hot melt adhesive layer. The adhesive is applied during extrusion of the tubing thus achieving a very smooth, constant adhesive layer, which ensures excellent sealing properties. HDT-A meets the longitudinal sealing requirements of VDE 0278 part 3 and is, therefore, ideal for sealing underground or exposed inline joints and terminations. Technical Features Continuous operating -55C to +130C Shrink ratio: Up to 4 : 1 temperature range: Outer wall only Base material: Polyolefin Shrink temperature: 135C (min) Flammability Self extinguishing Longitudinal change: -10% max Outer wall only 2 Tensile strength: 20 N/mm total wall Dielectrical stength 110 kV/cm Specifications: Germanischer Lloyd Type S VDE 0278 part 3 MIL-I-23053/15 Vureau Veritas 2557/4889 Lloyds Register of Shipping Note: Det Norske Veritas version available (MDT-A-F471) Ordering Information Type HDT-A Wall thickness Bore as supplied Bore recovered Wall thickness fully recovered Standard pack minimum maximum fully recovered Standard Colour meltable wall 1.0M length (M) (mm) (mm) total wall (mm) (mm) 12.0 3.0 3.2 0.7 100 19.0 6.0 3.3 0.8 100 30.0 8.0 4.8 0.8 40 38.0 12.0 4.8 0.8 30 Black 48.0 15.0 4.8 0.8 15 85.0 26.0 4.8 0.8 8 115.0 38.0 4.8 0.8 5 Important Notice Technical information provided by 3M is based on experience and/or tests believed to be reliable, but their accuracy is not guaranteed and the results may not be relevant to every users application. For this reason 3M does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3Ms liability for death or personal injury arising from its negligence. All questions of liability relating to 3M products are governed by the sellers terms of sale subject where applicable to the prevailing law. If any goods supplied or processed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the price paid for the goods or services. Except as set our above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. 3M is a trademark of the 3M Company. Printed in the UK. 3M United Kingdom PLC, 2003. 3M UK PLC 3M Ireland 3M UK PLC Electrical Products Sales Office Sales Office 3M Centre, Cain Road 3M House, Adelphi Centre PO Box 393 Bracknell, Berkshire RG12 8HT Dun Laoghaire, Co Dublin, Ireland Bedford MK41 0YE Telephone: 01344 858616 Telephone: 353 1 280 3555 Telephone: 01234 229462 Fax: 01344 858758 Fax: 353 1 280 3509 Fax: 01234 229433 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Heat Shrink Tubing and Sleeves category: Click to view products by 3M manufacturer: Other Similar products are found below : 770-006S102 5685710001 CR8248-000 CR9960-000 603312-4 607381P039 611112-000 617867N001 6500750004 CZ1420-000 D-306-38 770-003S106W2 770-005S105W1 770-005S106W1 770-007A303 770-010Y106W1 770-010Y706W1 7771210001 MFP-1/4 -Clear MFP- 3/64 -Clear 790-3012 MFT-MT2000-NO.14-0-SP MHHT-4-15K2-G-104 MIL-LT-1-1/2-4-SP MIL-LT-1-1/2-9-STK MIL-LT-1/2-2-STK MIL-LT-3-0-SP MIL-LT-3/32-0-SP MIL-LT-3/32-6-SP MIL-LT-3/4-6-SP MIL-LT-3/8-0-SP 8159270001 839602-000 8423-6 FP301-116- 6 -Black FP301-1/2-48 -Black FP301-12-48 -Black-Hdr FP301-1/4-48 -Black FP301-1/4-48 -White-Hdr FP301-18-48 -Black-Hdr FP301- 1/8-6 -Black FP301-18-6 -Black-Bulk FP301-316-48 -Blue-Hdr FP301-316-6 -Clear FP301-332-6 -Black 912229N002 120-126-16BL 121- 001-09 121-018-32 121-018-40