Scotchlok Terminals W MNG18-187DMI, MNG14-187DMI W Male Disconnect, Nylon Fully Insulated D L with Insulation Grip Data Sheet Wire Male Tab Range Width (W ) Barrel Barrel Product Number (AWG)xLThickness WD Length I.D. M8NG18-187DMI202-107.187 x 0.02 07.800.304.305.2 0.14 M4NG14-187DMI106-107.187 x 0.02 07.800.304.305.2 0.14 Installation Information WARNING Turn power off before installing or removing terminal. All electrical UNDERWRITERS CANADIAN STANDARDS work should be done according to appropriate electrical codes. LABORATORIES ASSOCIATION STANDARD NO. UL 310 STANDARD NO. C22.2 3M FILE NO. E70512 NO. 153 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-482, TR490 (ratchet style) hand tools. Specifications Wire Size: See Table Above Barrel Crimp (Electrical) Barrel Seam: Butted with Insulation Grip Insulation Crimp Maximum Voltage Rating: 600 V Building Wire (Mechanical) 1000 V Signs or Fixtures (Luminaires) Maximum Temperature Rating: 221F (105C) Suitable for factory application on steel or brass tabs Maximum Current: Same as Wire UL or CSA. Insulator Material: Nylon Suitable for field application on brass tabs, strain relief Terminal Material: ETP Copper Insulation Grip Material: Brass required, UL only. Plating: TinEngineering Specification Crimp-Type Male Quick Disconnect shall, electrically The Nylon Fully Insulated Male Quick Disconnect and mechanically connect permanently to a with Insulation Grip shall be tin plated 0.020 thick prestripped end of a stranded copper wire and, have a copper, with a 0.187 blade conforming to flat rectangular tongue portion for mating to a Female ANSI/NEMA DC-2 dimensions and a 0.24 long Quick Disconnect in a separable, reusable manner, barrel with a tin plated brass insulation grip covered forming a Quick Connect Wiring Connection. by a molded nylon funnel entry sleeve which extends to cover the tongue, color coded, and sized for a The connector line shall offer tongue variations (size specified (AWG) wire range (22-18, 16-14). 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2) and barrel variations in wire size 22-18 AWG, Insulated connectors shall be UL Listed and CSA 16-14 AWG, 12-10 AWG and construction non- Certified for 600 volts maximum, building wire: 1000 insulated, vinyl insulated, nylon fully insulated, etc. volts maximum, signs and fixtures (luminaires). The connector shall be temperature rated 221F (105C) The Nylon Fully Insulated Male Quick Disconnect maximum. shall have regulatory agency coverage (UL Listing, CSA Certification). The tongue shall be marked with Quick Disconnect connectors shall be suitable for field or factory wiring, with a UL Recognized strain relief the wire range and the manufacturers symbol. () required. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.