Scotchlok Terminals MNG18-250DMI, MNG14-250DMI, MNG10-250DMI Male Disconnect, Nylon Fully Insulated W W with Insulation Grip D L Data Sheet Wire Male Tab Range Width (W ) Barrel Barrel Product Number (AWG)xLThickness WD Length I.D. M8NG18-250DMI222-105.250 x 0.03 04.900.405.305.2 0.14 M4NG14-250DMI126-105.250 x 0.03 04.900.405.300.2 0.17 M0NG10-250DMI122-105.250 x 0.03 17.009.405.300.2 0.25 Installation Information WARNING UNDERWRITERS CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical LABORATORIES ASSOCIATION work should be done according to appropriate electrical codes. STANDARD NO. UL 310 STANDARD NO. C22.2 3M FILE NO. E70512 NO. 153 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or Wire Size: See Table Above TR-482, TR-490 (ratchet style) hand tools. Barrel Seam: Butted with Insulation Grip Maximum Voltage Rating: 600 V Building Wire Barrel Crimp (Electrical) 1000 V Signs or Fixtures (Luminaires) Insulation Crimp (Mechanical) Maximum Temperature Rating: 221F (105C) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: ETP Copper Suitable for factory application on steel or brass tabs UL Insulation Grip Material: Brass Plating: Tin or CSA. Suitable for field application on brass tabs, strain relief required, UL only.Engineering Specification Crimp-Type Male Quick Disconnect shall, electrically The Nylon Fully Insulated Male Quick Disconnect and mechanically connect permanently to a prestripped with Insulation Grip shall be tin plated .032 thick end of a stranded copper wire and, have a flat copper, with a 0.250 blade conforming to rectangular tongue portion for mating to a Female ANSI/NEMA DC-2 dimensions and a 0.25 long Quick Disconnect in a separable, reusable manner, barrel with a tin plated brass insulation grip covered by forming a Quick Connect Wiring Connection. a molded nylon funnel entry sleeve which extends to cover the tongue, color coded, and sized for a specified The connector line shall offer tongue variations (size (AWG) wire range (22-18, 16-14, 12-10). 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2) and barrel variations in wire size 22-18 AWG, Insulated connectors shall be UL Listed and CSA 16-14 AWG, 12-10 AWG and construction of non- Certified for 600 volts maximum, building wire: 1000 insulated, vinyl insulated, nylon fully insulated etc. volts maximum, signs and fixtures (luminaires). The connector shall be temperature rated 221F (105C) The Quick Disconnect shall have regulatory agency maximum. coverage (UL Listing, CSA Certification). The tongue shall be marked with the wire range and the Quick Disconnect connectors shall be suitable for field or factory wiring, with a UL Recognized strain relief manufacturers symbol.() required. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.