3 Scotchlok Terminals S MNG18-156DFI, MNG14-156DFI Female Snap Receptacle, Bullet Style Nylon Fully Insulated with Insulation Grip L Data Sheet Mating Snap Maximum Wire Range Diameter Barrel Barrel Insulation Product Number (AWG) SL Length I.D. Diameter M8NG18-156DFI262-1 02.15 15.0 05.205.09 0.14 M4NG14-156DFI166-1 02.15 15.0 05.200.11 0.17 Installation Information WARNING Turn power off before installing or removing terminal. All electrical UNDERWRITERS CANADIAN STANDARDS work should be done according to appropriate electrical codes. LABORATORIES ASSOCIATION STANDARD NO. UL 486A STANDARD NO. 22.2 3M FILE NO. E23438 NO. 0, 65 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended Wire Size: See Table Above 3M crimp tool: TH-440, TH-450 (scissor style), or Barrel Seam: Butted with Insulation TR-482, TR-490 (ratchet style) hand tools. Grip Maximum Voltage Rating: 600 V Building Wire 1000 V Signs or Barrel Crimp (Electrical) Fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Insulation Crimp (Mechanical) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: Brass Insulation Grip Material: Brass Plating: TinEngineering Specification The Nylon Fully Insulated Bullet-Style Female Crimp-Type Female Disconnects shall, electrically and Disconnect shall be tin-plated 0.016 thick brass with a mechanically, connect permanently to a prestripped receptacle for gripping a bullet-style Male Tab of end of a stranded copper wire and have a tongue diameter 0.156 per ANSI/NEMA CD-2 and a 0.250 portion with fingers which grip a Male Disconnect in a long barrel with a tin-plated brass, funnel entry separable, reusable manner, forming a Quick Connect insulation grip, covered by a molded nylon funnel Wiring Termination. entry sleeve, which extends to cover the tongue, color coded and sized for a specified (AWG) wire range (red, The connector line shall offer tongue variations (sized 22-18 blue, 16-14). to grip bullet-style Male Tabs 0.156 diameter per ANSI/NEMA CD-2) and barrel variations in wire Insulated connectors shall be UL Listed and CSA (AWG) size (22-18, 16-14) and construction (vinyl Certified for 600 V building wire: 1000 V signs or insulated, nylon fully insulated, etc.). The female lighting fixtures (luminaires) and temperature rated disconnects shall have regulatory agency coverage (UL 221F (105C) maximum. Listing, CSA Certification). The tongue portion shall be marked with the wire range and manufacturers symbol ( ). 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0389-8-A