Scotchlok Terminals W W MNG18-250DM, MNG14-250DM, MNG10-250DM L Male Disconnect, Nylon Insulated with Insulation Grip Data Sheet Wire Male Tab Maximum Range Width (W ) Barrel Barrel Insulation Product Number (AWG)xLThickness Length I.D. Diameter M8NG18-250DM222-102.250 x 0.0305.905.205.06 0.14 M4NG14-250DM126-104.250 x 0.0305.905.200.08 0.17 M0NG10-250DM122-105.250 x 0.0315.000.200.15 0.25 Installation Information WARNING CANADIAN STANDARDS UNDERWRITERS ASSOCIATION Turn power off before installing or removing terminal. All electrical LABORATORIES work should be done according to appropriate electrical codes. STANDARD NO. C22.2 STANDARD NO. UL 310 NO. 153 3M FILE NO. E70512 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) hand tools, or TR-482, TR-490 (ratchet style) hand tools. Specifications Wire Size: See Table Above Barrel Seam: Butted with Barrel Crimp (Electrical) Insulation Grip Maximum Voltage Rating: 600 V Building Wire 1000 V Signs or Insulation Crimp Fixtures (Luminaires) (Mechanical) Maximum Temperature Rating: 221F (105C) Maximum Current: Same as Wire Suitable for factory application on steel or brass tabs UL or Insulator Material: Nylon CSA. Terminal Material: ETP Copper Insulation Grip Material: Brass Suitable for field application on brass tabs, strain relief Plating: Tin required, UL only.Engineering Specification Crimp-Type Male Quick-Slide Connectors shall, The Nylon Insulated 0.250 Male Disconnect with electrically and mechanically connect permanently to Insulation Grip shall be tin plated 0.032 thick copper, the prestripped end of a stranded copper wire and, have with a 0.250 blade conforming to ANSI/NEMA DC-2 a flat rectangular tongue portion for mating to a Female dimension and a 0.25 long barrel with a tin plated Disconnect in a separable, reusable manner, forming a brass funnel entry insulation grip covered by a molded Quick Connect Wiring Connection. nylon sleeve, color coded, and sized for a specified (AWG) wire range (22-18, 16-14, 12-10). The connector line shall offer tongue variations (size 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2) Insulated connectors shall be UL Listed and CSA and barrel variations in wire size 22-18 AWG, 16-14 Certified for 600 volts maximum, building wire: 1000 AWG, 12-10 AWG and construction of non-insulated, volts maximum, signs and fixtures (luminaires) The vinyl insulated nylon fully insulated, etc. connector shall be temperature rated 221F (105C) maximum. The Quick-Slide Connectors shall have regulatory agency coverage (UL Listing, CSA Certification). The Quick Slide Connectors shall be suitable for field or tongue shall be marked with the wire range and the factory wiring, with a UL Recognized strain relief required. manufacturers symbol. ( ) 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.