Scotchlok Terminals W MNHU18-250DFI, MNHU14-250DFI, W MNHU10-250DFI D Female Disconnect, Nylon/Heat Shrink L Fully Insulated, Butted Seam Data Sheet Wire Male Tab Range Width (W ) Barrel Barrel Product Number (AWG)xLThickness WD Length I.D. M8NHU18-250DFI222-102.250 x 0.03 17.03.305.200.2 0.08 M4NHU14-250DFI126-102.250 x 0.03 17.03.305.200.2 0.08 M0NHU10-250DFI122-102.250 x 0.03 19.02.305.305.2 0.16 Specifications Installation Information Wire Size: See Table Above Barrel Seam: Butted WARNING Maximum Voltage Rating: 600 V Building Wire Turn power off before installing or removing terminal. All electrical 1000 V Signs or work should be done according to appropriate electrical codes. Fixtures (Luminaires) Maximum Temperature Rating: 221F (105C) Maximum Current: Same as Wire For use on stranded copper wire only. Insulator Material: Nylon/Adhesive Lined Polyolefin Strip away the end 3/8 inch of wire insulation. Terminal Material: Brass Plating: Tin Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) hand tools. Barrel Crimp (Electrical) Shrink tubing using a heat gun. Heat until tubing is com- pletely shrunk and adhesive protrudes slightly from the tubing.Engineering Specification Crimp-Type Female Disconnects shall, electrically The Nylon Fully Insulated 0.250 Female Disconnect and mechanically connect permanently to a shall be tin plated 0.020 thick brass, with a tongue for prestripped end of a stranded copper wire: and have a gripping a 0.250 x 0.032 male tab per ANSI/NEMA tongue portion with fingers which grip a male quick CD-2 and a 0.25long barrel covered by a molded disconnect in a separable, reusable manner, forming a nylon funnel entry sleeve, which extends to cover the Quick Connect Wiring Connection. tongue, color coded, and sized for a specified (AWG) wire range (22-18, 16-14, 12-10). Color coded The connector line shall offer a tongue variations adhesive lined heat shrink tubing extends from the (sized to grip Male Tabs: 0.250 x 0.032 per crimp area beyond the terminal. The heat activated ANSI/NEMA CD-2) and barrel variations in tubing conforms to the terminal and the adhesive wire(AWG) size (22-18, 16-14, 12-10) and bonds to the conductor. construction (nylon fully insulated and polyolefin heatshrink material). The tongue shall be marked with the wire range and the manufacturers symbol ( ). 3M and Scotchlok are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.