Scotchlok Terminals W MNI18-250DFI, MNI14-250DFI, MNI10-250DFI Female Disconnect, Interlock Barrel, L Nylon Fully Insulated Data Sheet Mates with Wire Male Tab Maximum Product Range Width (W ) Barrel Barrel Insulation Number (AWG)xLThickness Length I.D. Diameter M8NI18-250DFI222-101.250 x 0.03 05.906.205.07 0.14 M4NI14-250DFI126-101.250 x 0.03 05.906.205.07 0.14 M0NI10-250DFI122-109.250 x 0.0305.908.200.12 0.25 Installation Information WARNING Turn power off before installing or removing terminal. All electrical CANADIAN STANDARDS UNDERWRITERS work should be done according to appropriate electrical codes. ASSOCIATION LABORATORIES STANDARD NO. 22.2 STANDARD NO. UL 310 NO. 153 3M FILE NO. E70512 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended Specifications 3M crimp tool: TH-440, TH-450 (scissor style), or TR- 490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Interlock Barrel Crimp (Electrical) Maximum Voltage Rating: 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Suitable for factory installation on steel or brass tabs, UL Maximum Current: Same as Wire Insulator Material: Nylon and CSA. Terminal Material: Brass Suitable for field application on brass tabs, strain relief is Plating: Tin required, UL only.Engineering Specification Crimp-Type Female Disconnect shall, electrically and The Nylon Fully Insulated 0.250 Female Disconnect mechanically, connect permanently to a prestripped with interlocking barrel shall be tin plated 0.020 thick end of a stranded copper wire: and have a tongue brass with a tongue for gripping a 0.250 x 0.032 portion with fingers which grip a Male Disconnect in a Male Tab per ANSI/NEMA CD-2 and a 0.25 long separable, reusable manner, forming a Quick Connect barrel covered by a molded nylon sleeve, which Wiring Termination. extends to cover the tongue, color coded and sized for a specified (AWG) wire range (22-18, 16-14, 12-10). The connector line shall offer tongue variations (sized to 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA Insulated connectors shall be UL Listed and CSA CD-2) and barrel variations in wire (AWG) size Certified for 600 V building wire: 1000 V signs or (22-18, 16-14, 12-10) and construction (non-insulated, lighting fixtures (luminaires) and temperature rated vinyl insulated, nylon fully insulated, etc.). The female 221F (105C) maximum. disconnect shall have regulatory agency coverage (UL Listed, CSA Certification). The tongue portion shall be Female Disconnects shall be suitable for field or marked with the wire range and manufacturers factory wiring, with a UL Recognized strain relief symbol ( ). required. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0375-7-A