3 Scotchlok Terminals S MVU18-156DM, MVU14-156DM, MVU10-156DM Male Snap Plug, Vinyl Insulated, Butted Seam L Data Sheet Mating Snap Maximum Wire Range Diameter Barrel Barrel Insulation Product Number (AWG) SL Length I.D. Diameter M8VU18-156DM262-1 05.15 09.8 00.105.07 0.14 M4VU14-156DM166-1 05.15 09.8 00.100.09 0.17 M0VU10-156DM162-1 04.15 02.9 05.200.15 0.25 Installation Information WARNING CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical UNDERWRITERS work should be done according to appropriate electrical codes. ASSOCIATION LABORATORIES STANDARD NO. 22.2 STANDARD NO. UL 486A NO. 0, 65 3M FILE NO. E23438 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended Wire Size: See Table Above 3M crimp tool: TH-440, TH-450 (scissor style), or Barrel Seam: Butted TR-490 (ratchet style) hand tools. Maximum Voltage Rating: 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Barrel Crimp (Electrical) Maximum Current: Same as Wire Insulator Material: Vinyl Terminal Material: Brass Plating: TinEngineering Specification The vinyl insulated 0.156 Male Snap Plug shall be tin- Crimp-Type Snap Plug Connectors shall, electrically plated 0.030 thick copper, with a tongue tapered from and mechanically, connect permanently to a 0.156 diameter and a butted seam barrel covered by a prestripped end of a stranded copper wire and have a molded vinyl funnel entry sleeve, color coded and round tongue portion for mating to a Snap Receptacle sized for a specified (AWG) wire range (22-18, 16-14, in a separable, reusable manner. 12-10). The connector line shall offer tongue variations (0.156 Insulated separable connectors shall be UL Listed and and 0.180 diameter) and barrel variations in wire CSA Certified for 600 V building wire: 1000 V signs (AWG) size (22-18, 16-14, 12-10) and construction or lighting fixtures (luminaires) and temperature rated (vinyl insulated, nylon insulated with insulation grip). 221F (105C) maximum. The separable connectors shall have regulatory agency coverage (UL Listed, CSA Certification). The separable connector formed by the paired Male Snap Plug and Female Snap Receptacle may require a suitable strain relief to prevent accidental separation. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0393-0-A