RJS-3-10FT 3M

3M RJS Series Rejacketing Sleeves Data Sheet August 2014 F CAUTION Working around energized high-voltage systems may cause serious injury or death. Installation should be performed by personnel familiar with good safety practice in handling high-voltage electrical equipment. De-energize and ground all electrical systems before installing product. 3M RJS Series Rejacketing Sleeve assemblies are designed so that 3M Cold Product Shrink QTIII and QTII Silicone Rubber Terminations can be used on 3/C (three Description conductor) medium voltage (35 kV and less) shielded power cables with tape shield, wire shield, armored and non-armored configurations. The RJS Series Rejacketing Sleeve Assemblies are: A series of silicone rubber insulators incorporating an inner expandable polyester braid designed to reduce sliding friction and deliver the insulator onto the cable. Designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. Designed to be used in conjunction with 3M Cold Shrink Breakout Boots and Silicone Rubber Terminations. Kit Configurations 1- Poly-bagged four-foot continuous length assembly with inner polyester braid ten poly bags per carton. 1- Poly-bagged six-foot continuous length assembly with inner polyester braid ten poly bags per carton. 1- Poly-bagged ten-foot continuous length assembly with inner polyester braid one poly bag per carton. Continuous length assemblies are easily trimmed to length to meet field determined installation requirements. 1 of 11 3M RJS Series Rejacketing Sleeves Features Versatile: installs quickly and accommodates a wide range of cable sizes. Simple hand application: no need for special installation tools. No torches or heat required. Excellent resistance to ozone and ultra-violet radiation. Good solvent resistance: compatible with industry approved cable cleaners. Excellent thermal stability. High dry and wet insulation resistance. Excellent shelf life. Easy to adjust sleeve length: adapts to variable equipment connection and mounting requirements. Compatible with 3M Cold Shrink Breakout Boots and Termination Products. RJS Series Rejacketing Sleeve Assemblies : Applications Are used to protect shielded phase legs (cores) of 3/C medium voltage (35 kV and less) power cables after the jacket has been removed in preparation for terminating. 2 Accommodate cable sizes ranging from 8 AWG (8 mm ) 3.3 kV to 750 kcmil (325 2 mm ) 35 kV. Are available in six sizes to cover cable metallic shield diameters ranging from 0.43 (10,9 mm) to 1.91 (48,5 mm). Termination designs incorporating 3M 3/C Phase Rejacketing System RJS Series sleeve assemblies can be field tested using normal cable testing procedures (reference: ANSI/IEEE Standard 400 Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable System. Refer to most recent version.). 2 of 11