Technical Data July 2015 3M Bumpon Protective Products Die Cut Shapes - SJ5200 Series SJ5201 SJ5202 Product Description 3M Bumpon Protective Products SJ5201 and SJ5202 are pressure-sensitive, adhesive backed polyurethane products made from SJ5200 Series soft foam rollstock. A hexagon shape is often preferred for various cushioning stop and non-skid foot applications. These products have a very high tack adhesive system (synthetic rubber, R-25), and is designed for providing excellent adhesion to a wide variety of substrates. This includes many low surface energy substrates such as polypropylene, polyethylene, and powder coated paints. Product Construction Product Number SJ5201 SJ5202 Width, inches (mm): 0.433 (11.0) 0.433 (11.0) Height, inches (mm): 0.125 (3.2) 0.063 (1.6) Form: 11 x 12 matrix 11 x 12 matrix Color: Light brown Light brown Bumper Material: Polyurethane foam Adhesive: Synthetic rubber (R-25) Release Liner: 4 mil, silicone coated, translucent polyester (PET), with printed 3M logo All dimensions are 0.020 inches or 0.5 mm measured without the adhesive liner. 3M Bumpon Protective Products Die Cut Shapes - SJ5200 Series - SJ5201 SJ5202 Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Property Test Method SJ5201 SJ5202 Hardness, Shore M: Tested in accordance with 29 36 ASTM D-2240 test method 3 Approximate Density: lb/ft 40 3 (gm/cm ) (0.64) Compression Set,%: Tested in accordance with ASTM D-1056 test method 22 hrs. < 10% 62C (158F) (50% defection) Stain Resistance:** 3M - 24 hrs. 62C (158F) no staining against white paint, 7 days observed exposed to UV. Flammability Listing: UL Certification SJ5200 Series are not rated Service Temperature: -34C (-30F) to 66C (150F) 107C (225F) intermittent exposure. Application Temperature: 5C (40F) to 52C (125F) **Reference test for 24 hours. Results may vary for different time periods and conditions. Adhesive Performance Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. The following table on peel adhesion provide representative performance characteristics of the adhesive system used in the construction of 3M Bumpon Protective Products Die Cut Shapes SJ5200 Series. 90 Peel Adhesion* Peel Force, oz. Per 1/2 inch 3M Bumpon Protective Products SJ5200 Series Substrate: Synthetic Rubber R-25 Polypropylene 52 Polystyrene 55 ABS 55 Stainless Steel 55 Aluminum 55 *3 M Test Method TM-2011 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using solid resilient rollstock (SJ6216) with same R-25 adhesive system. (2)