TR-490 Ratchet Insulated Tool Capability: Dies Color Crimping Crimps barrel and insulation grip independently on No. Coded Dies 2 2210 AWG (0,356,0 mm ) insulated and non-insulated terminals and connectors: nylon or vinyl insulated, butted or brazed seam. Crimping Dies: 2 Insulated No. 2218 AWG (0,350,97 mm ) red color coded. 2 Insulated no. 1614 AWG (1,325 mm ) blue color coded. 2 Insulated No. 1210 AWG (4,06,0 mm ) yellow color coded. Pawl Ratchet 2 Non-Insulated No. 2214 AWG (0,352,5 mm ). Release 2 Non-Insulated No. 1210 (4,06,0 mm ). Lever Field Re-calibration: Calibration adjustment of ratchet can be accomplished in the field. See calibration and maintenance instructions packaged with the tool. Positive Closure: Ratchet requires full closure of handles to ensure proper crimp. Ratchet release lever allows removal of misplaced R e d terminals. P l a s t i c G r i p Materials and Finish: Hardened steel jaws and handles with corrosion resistant finish. Weight: 0.8 lbs. Grip: Plastic, red color. Specifications: Non-insulated and insulated terminals and connectors from 2210 AWG shall be crimped with a positive action (ratchet) tool and be UL Listed with that tool. Non-insulated die shall be of an indent shape and insulated die shall be of a flat, smooth shape capable of crimping pre-insulated vinyl and nylon terminals and connectors. Dies shall be marked with the appropriate wire range and insulated dies shall be color coded: red for 2218 AWG, blue for 1614 AWG, and yellow for 1210 AWG. The tool shall be compound lever type with a ratchet mechanism to insure positive closure for full crimping cycle. Tool shall be capable of field adjustment to proper calibration with common tools and materials specified in the maintenance and calibration section of the instruction booklet provided with the tool. The manufacturer shall provide a guide for maintenance procedure and instructions to field inspect for specified die gaps. Jaws shall be hardened steel and coated with a corrosion resistant finish. Tool shall be a 3M Scotchlok TR-490. 3M Terminals and Connectors are ULListed and CSACertified with the TR-490. For specific tooling information, see Tool Selection Guide in the the Appendix. UPC Wire Tools/ Tools/ Product (054007-) Range Carton Case TR-490 70481 22-10 1 10X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Crimpers / Crimping Tools category: Click to view products by 3M manufacturer: Other Similar products are found below : 010-0096 M225201-06 M225202-37 6-1579015-5 CT150-2-D02 M322 6-304052-1 63456-0054 63484-3701 63800-8355 63819-1875 63819-2875 63819-4475 63823-3475 63827-5375 64001-0975 64001-4175 64005-0175 662903-2 690602-6 7-1579001-9 7-23471-1 762637-1 808714-1 811242-5 999-50-020083 1-21002-3 1-21002-7 12085270 1-21002-6 1-21113-6 1-22548-4 125442-1 DCE.91.073.BVC DCE.91.090.3MVM DCE.91.130.5MVU 1338300-1 1-354003-0 1338301-1 DF62/RE-MD 142321 1456088-1 1490794- 1 1-45804-6 1490357-2 1490357-3 AX100749 1-59619-7 1596970-1 1-59619-8