Data Sheet QBVE067A0B Barracuda* DC-DC Converter Power Modules 40-60Vdc Input 12.0Vdc, 67.0A, 800W Output Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to REACH Directive (EC) No 1907/2006 Can be processed with paste-through-hole Pb or Pb-free reflow process High and flat efficiency > 96.3% 50-90% load at Vin=50V dc Input voltage range: 40-60V dc Delivers up to 800W output power RoHS Compliant Fully regulated 12V output voltage at Vin minimum Low output ripple and noise Industry standard, DOSA Compliant Quarter Brick: Applications 58.4mm x 36.8mm x 12.7 mm Distributed power architectures (2.30in x 1.45in x 0.50in) Intermediate bus voltage applications Constant switching frequency Networking equipment including Power over Ethernet (PoE) Remote On/Off control Servers and storage applications Output over current/voltage protection Supercomputers Over temperature protection Automatic Test Equipment Wide operating temperature range: -40C to 85C, continuous ANSI/UL 62368-1 and CAN/CSA C22.2 No. 62368-1 Recognized, Options DIN VDE 0868-1/A11:2017 (EN62368-1:2014/A11:2017) Meets the voltage and current requirements for ETSI 300-132- Passive Droop Load Sharing (-P=option code) 2 and complies with and licensed for Basic insulation rating per Negative Remote On/Off logic (1=option code, factory EN60950-1 preferred) 2250V Isolation tested in compliance with IEEE 802.3 PoE dc Auto-restart after fault shutdown (4=option code, factory standards preferred) CE mark meets 2014/35/EU directive Pin trim ISO** 9001 and ISO14001 certified manufacturing facilities Base plate (-H=option code, always required) Description The QBVE067A0B Barracuda series of dc-dc converters are a new generation of fully regulated DC/DC power modules designed to support 12.0Vdc intermediate bus applications where multiple low voltages are subsequently generated using point of load (POL) converters, as well as other application requiring a tightly regulated output voltage. The QBVE067A0B series operate from an input voltage range of 40 to 60Vdc and provide up to 800W output power with a fully regulated output voltage of 12.0Vdc in an industry standard, DOSA compliant quarter brick. The converter incorporates digital control, synchronous rectification technology, a fully regulated control topology, and innovative packaging techniques to achieve efficiency exceeding 96.3% at 12.0Vdc output. This leads to lower power dissipations such that for many applications a heat sink is not required. Standard features include a heat plate to attach external heat sinks or contact a cold wall, on/off control, output overcurrent and over voltage protection, over temperature protection, input under and over voltage lockout. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. Built-in filtering for both input and output minimizes the need for external filtering. * Trademark of General Electric Company UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated. This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed. ** ISO is a registered trademark of the International Organization of Standards. 2020 ABB. All rights reserved. November 9, 2020 Data Sheet QBVE067A0B Barracuda DC-DC Converter Power Modules 40-60Vdc Input 12.0Vdc, 67.0A, 800W Output Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the Data Sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit 1 Input Voltage Continuous VIN -0.3 60 Vdc Non- operating continuous VIN 64 Vdc Operating Ambient Temperature T -40 85 C A 0 Storage Temperature Tstg -40 125 C 2 I/O Isolation Voltage (100% factory Hi-Pot tested) 2250 Vdc 1 Input over voltage protection will shutdown the output voltage when the input voltage exceeds threshold level. 2 Base plate is considered floating. Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage V 40 48/52/54 60 V IN dc Maximum Input Current IIN,max 22 Adc (VIN=40V, IO=IO, max) Input No Load Current All I 195 mA IN,No load (V = V , I = 0, module enabled) IN IN, nom O Input Stand-by Current All IIN,stand-by 30 mA (VIN = VIN, nom, module disabled) External Input Capacitance All 140 F 2 2 Inrush Transient All I t 1 A s Input Terminal Ripple Current (Measured at module input pin with maximum specified input capacitance and < 500uH inductance between voltage source and All 900 mArms input capacitance) 5Hz to 20MHz, V = 48V, I = I IN O Omax Input Ripple Rejection (120Hz) All 25 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 30A in the ungrounded input lead of the power supply (see Safety Considerations section). Based on the information provided in this Data Sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturers Data Sheet for further information. November 9, 2020 2020 ABB. All rights reserved Page 2