Data Sheet GE 65W Boost Converter: Non-Isolated DC-DC Modules 8Vdc 16Vdc input 32Vdc to 54Vdc output 65W Output power (max.) Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to IPC-9592 (September 2008), Category 2, Class II Compatible in a Pb-free or SnPb reflow environment (Z versions) Compliant to REACH Directive (EC) No 1907/2006 Wide Input voltage range (8Vdc-16Vdc) Output voltage programmable from 32 to 54Vdc via external resistor RoHS Compliant TM Tunable Loop to optimize dynamic output voltage response Power Good signal Applications Output overcurrent protection (non-latching) Industrial equipment Over temperature protection Distributed power architectures Remote On/Off Telecommunications equipment Ability to sink and source current Vin+ Vout+ Support Pre-biased Output VIN VOUT Optimized for conduction-cooled applications PGOOD RTUNE MODULE Small size: 27.9 mm x 11.4 mm x 8.5 mm(MAX) (1.1 in x 0.45 in x 0.335 in) CTUNE Cin TRIM Co Wide operating temperature range -40C to 85C RTrim ANSI/UL* 62368-1 and CAN/ CSA C22.2 No. 62368-1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368- ON/OFF 1:2014/A11:2017) SIG GND GND ISO** 9001 and ISO 14001 certified manufacturing GND facilities Description The Boost power modules are non-isolated dc-dc converters that can deliver up to 65W of output power. The module can operate over a wide range of input voltage (V = 8Vdc-16Vdc) and provide an adjustable 32 to 54VDC output. The output IN voltage is programmable via an external resistor. Features include remote On/Off, over current and over temperature TM protection. The module also includes the Tunable Loop feature that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards March 9, 2021 2017 General Electric Company. All rights reserved. Data Sheet GE 65W Boost Converter: Non-Isolated DC-DC Power Modules 8Vdc 16Vdc input 32Vdc 54Vdc output, 65W output power (max.) Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All V -0.3 18 V IN Continuous Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 8 16 Vdc IN Maximum Input Current All I 10 Adc IN1max (VIN=8V,Vo=40V, IO=IO, max ) VO,set = 32 Vdc IIN ,No load 125 mA Input No Load Current (VIN = 12Vdc, IO = 0, module enabled) VO,set = 54Vdc IIN, No load 190 mA Input Stand-by Current All I 5 10 mA IN ,stand-by (VIN = 12Vdc, module disabled) 2 2 Inrush Transient All I t 1 A s 1 Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance VIN =8 to 16V, IO= IOmax See All 285 mAp-p Test Configurations) Input Ripple Rejection (120Hz) All 15 dB March 9, 2021 2017 General Electric Company. All rights reserved. Page 2