Datasheet GE 130W Boost Converter: Non-Isolated DC-DC Power Modules 8Vdc 16Vdc input 16Vdc 34Vdc output, 130W output power (max.) Features Compliant to RoHS II EU Directive 2011/65/EU Compliant to IPC-9592 (September 2008), Category 2, Class II Compatible in a Pb-free or SnPb reflow environment (Z versions) Compliant to REACH Directive (EC) No 1907/2006 Wide Input voltage range (8Vdc-16Vdc) Output voltage programmable from 16 to 34Vdc via external resistor TM Tunable Loop to optimize dynamic output voltage response Power Good signal Applications Output over current protection (Vo drops to Vin) Over temperature protection Industrial equipment Remote On/Off Distributed power architectures Support Pre-biased Output Telecommunications equipment Optimized for conduction-cooled applications Small size: 27.9 mm x 24 mm x 8.5 mm(MAX) (1.1in x 0.94in x 0.33in) Wide operating temperature range -40C to 85C nd UL* 60950-1 2 Ed. Recognized, CSA C22.2 No. 60950-1- nd 07 Certified, and VDE (EN60950-1 2 Ed.) Licensed ISO** 9001 and ISO 14001 certified manufacturing facilities Description The Boost power modules are non-isolated dc-dc converters that can deliver up to 130W of output power. The module can operate over a wide range of input voltage (V = 8Vdc-16Vdc) and provide an adjustable 16 to 34VDC output. The IN output voltage is programmable via an external resistor. Features include remote On/Off, over current and over TM temperature protection. The module also includes the Tunable Loop feature that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Data Sheet GE 130W Boost Converter: Non-Isolated DC-DC Power Modules 8Vdc 16Vdc input 16Vdc 34Vdc output, 130W output power (max.) Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN -0.3 18 V Continuous Operating Ambient Temperature All TA -40 85 C (see Thermal Considerations section) Storage Temperature All Tstg -55 125 C General Specifications Parameter Device Min Typ Max Unit Calculated MTBF (IO=0.8IO, max, TA=40C) Telecordia Issue 3 Method 1 All 32,263,860 Hours Case 3 Weight 10.8 g (oz.) Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 8 16 Vdc IN Maximum Input Current All I 20 Adc IN1max (VIN=8V, Vout = 34V, IO=IO, max ) VO,set = 16 Vdc IIN ,No load 78 mA Input No Load Current (V = 12Vdc, I = 0, module enabled) IN O VO,set = 34Vdc IIN, No load 260 mA Input Stand-by Current All I 10 20 mA IN ,stand-by (V = 12Vdc, module disabled) IN 2 2 Inrush Transient All I t 1 A s 1 Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance V =8 to 16V I = I See All 285 mAp-p IN , O Omax Test Configurations) Input Ripple Rejection (120Hz) All 15 dB Note 1 Both pairs of input power pins (3, 4, 5, and 6) must be used July 23, 2019 2017 General Electric Company. All rights reserved. Page 2