APTS020A0X3-SRZ ABB

Data Sheet GE TM 12V TLynx 20A: Non-Isolated DC-DC Power Modules 4.5Vdc 14Vdc 0.69V to 5.5Vdc output 20A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 (Z versions) Compatible in a Pb-free or SnPb reflow environment (Z versions) Compliant to REACH Directive (EC) No 1907/2006 Wide Input voltage range (4.5Vdc-14Vdc) Output voltage programmable from 0.69Vdc to 5.5 Vdc via external resistor TM Tunable Loop to optimize dynamic output voltage response Flexible output voltage sequencing EZ-SEQUENCE (APTS TM RoHS Compliant EZ-SEQUENCE versions) Applications Fixed switching freqeuency and ability to synchronize with external clock Distributed power architectures Output overcurrent protection (non-latching) Intermediate bus voltage applications Overtemperature protection Telecommunications equipment Remote On/Off Servers and storage applications Remote Sense Networking equipment Power Good signal Industrial equipment Ability to sink and source current Vin+ Vout+ VIN VOUT Small size: SENSE PGOOD RTUNE 33 mm x 13.46 mm x 8.5 mm MODULE (1.3 in x 0.53 in x 0.334 in) SEQ Cin Co Wide operating temperature range -40C to 85C CTUNE ON/OFF TRIM ANSI/UL* 62368-1 and CAN/ CSA C22.2 No. 62368-1 Q1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368- RTrim GND 1:2014/A11:2017) ISO** 9001 and ISO 14001 certified manufacturing facilities Description TM The 12V TLynx series of power modules are non-isolated dc-dc converters that can deliver up to 20A of output current. These modules operate over a wide range of input voltage (V = 4.5Vdc-14Vdc) and provide a precisely regulated output IN voltage from 0.69Vdc to 5.5Vdc, programmable via an external resistor. Features include frequency synchronization, remote On/Off, adjustable output voltage, over current and temperature protection, power good and output voltage sequencing. The Ruggedized version (-D) is capable of operation up to 105C and withstand high levels of shock and vibration. The Tunable TM Loop , allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards 2017 General Electric Corporation. All rights February 17, 2021 reserved. Data Sheet GE TM 12V TLynx 20A: Non-Isolated DC-DC Power Modules 4.5Vdc 14Vdc input 0.69Vdc to 5.5Vdc output 20A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All V -0.3 15 Vdc IN Continuous Voltage on SEQ terminal All V -0.3 V Vdc SEQ IN Voltage on SYNC terminal All V -0.3 12 Vdc SYNC Voltage on PG terminal All V -0.3 6 Vdc PG Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 4.5 14 Vdc Maximum Input Current All IIN,max 20 Adc (VIN=4.5V to 14V, IO=IO, max ) Input No Load Current (V = 10.0Vdc, I = 0, module enabled) V = 0.69 Vdc I 42 mA IN O O,set IN,No load (VIN = 12.0Vdc, IO = 0, module enabled) VO,set = 3.3Vdc IIN,No load 74 mA Input Stand-by Current All I 3 mA IN,stand-by (VIN = 12.0Vdc, module disabled) 2 2 Inrush Transient All I t 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance V =4.5V to All 43 mAp-p IN 14V I = I See Test Configurations) , O Omax Input Ripple Rejection (120Hz) All 45 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 20 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturers data sheet for further information. 2017 General Electric Corporation. All rights February 17, 2021 Page 2 reserved.