Data Sheet GE TM 12V MegaTLynx : Non-Isolated DC-DC Power Modules 6Vdc 14Vdc input 0.8Vdc to 3.63Vdc output 30A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to IPC-9592 (September 2008), Category 2, Class II Compliant to REACH Directive (EC) No 1907/2006 Delivers up to 30A of output current High efficiency: 92.9% 3.3V full load (VIN=12Vdc) Input voltage range from 6 to 14Vdc Output voltage programmable from 0.8 to 3.63Vdc Small size and low profile: RoHS Compliant 33.0 mm x 13.46 mm x 10.00 mm (1.30 in. x 0.53 in. x 0.39 in.) Applications Monotonic start-up Startup into pre-biased output Distributed power architectures TM Output voltage sequencing (EZ-SEQUENCE ) Intermediate bus voltage applications Remote On/Off Telecommunications equipment Remote Sense Servers and storage applications Over current and Over temperature protection Networking equipment Option- Parallel operation with active current sharing Wide operating temperature range (-40C to 85C) Vin+ Vout+ VIN VOUT ANSI/UL* 62368-1 and CAN/ CSA C22.2 No. 62368-1 SENSE Recognized, DIN VDE 0868-1/A11:2017 (EN62368- RTUNE 1:2014/A11:2017) MODULE ISO** 9001 and ISO 14001 certified manufacturing Cin Co facilities CTUNE ON/OFF TRIM RTrim GND Description TM The 12V MegaTLynx power modules are non-isolated dc-dc converters that can deliver up to 30A of output current. These modules operate over a wide range of input voltage (V = 6Vdc-14Vdc) and provide a precisely regulated output voltage from 0.8Vdc to IN 3.63Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current and over temperature protection, output voltage sequencing and paralleling with active current sharing (-P versions). A new feature, the TM Tunable Loop , allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF) February 17, 2021 2013 General Electric Company. All rights reserved. Data Sheet GE TM 12V MegaTLynx : Non-Isolated DC-DC Power Modules 6Vdc 14Vdc input 0.8Vdc to 3.63Vdc output 30A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All VIN -0.3 15 Vdc Sequencing pin voltage All VsEQ -0.3 15 Vdc Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All Tstg -55 125 C Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 6.0 12 14 Vdc IN Maximum Input Current All I 19 Adc IN,max (VIN= VIN,min , VO= VO,set, IO=IO, max) 2 2 Inrush Transient All 1 I t A s Input No Load Current V = 0.8 Vdc I 91 mA O,set IN,No load (VIN = 12.0Vdc, IO = 0, module enabled) VO,set = 3.3Vdc IIN,No load 265 mA Input Stand-by Current All I 20 mA IN,stand-by (V = 12.0Vdc, module disabled) IN Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance VIN=6.0V to All 100 mAp-p 14.0V, IO= IOmax See Figure 1) Input Ripple Rejection (120Hz) All 50 dB February 17, 2021 2013 General Electric Company. All rights reserved. Page 2