Data Sheet GE TM MicroTLynx 12A: Non-Isolated DC-DC Power Modules 2.4Vdc 5.5Vdc input 0.6Vdc to 3.63Vdc output 12A Output Current Features Compliant to RoHS EU Directive 2002/95/EC (Z versions) Compatible in a Pb-free or SnPb reflow environment (Z versions) Wide Input voltage range (2.4Vdc-5.5Vdc) Output voltage programmable from 0.6Vdc to 3.63 Vdc via external resistor TM Tunable Loop to optimize dynamic output voltage TM response RoHS Compliant EZ-SEQUENCE Flexible output voltage sequencing EZ-SEQUENCE APTH versions Remote sense Applications Fixed switching frequency Distributed power architectures Output overcurrent protection (non-latching) Intermediate bus voltage applications Overtemperature protection Telecommunications equipment Remote On/Off Servers and storage applications Ability to sink and source current Networking equipment Cost efficient open frame design Industrial equipment Small size: 20.3 mm x 11.4 mm x 8.5 mm (0.8 in x 0.45 in x 0.334 in) Vin+ Vout+ Wide operating temperature range (-40C to 85C) VIN VOUT SENSE UL* 60950-1Recognized, CSA C22.2 No. 60950-1-03 Certified, and VDE 0805:2001-12 (EN60950-1) RTUNE MODULE Licensed SEQ Cin Co ISO** 9001 and ISO 14001 certified manufacturing CTUNE facilities ON/OFF TRIM Q1 RTrim GND Description TM The Micro TLynx series of power modules are non-isolated dc-dc converters that can deliver up to 12A of output current. These modules operate over a wide range of input voltage (VIN = 2.4Vdc-5.5Vdc) and provide a precisely regulated output voltage from 0.6Vdc to 3.63Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current and overtemperature protection, and output voltage sequencing (APTH versions). A new TM feature, the Tunable Loop , allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards September 11, 2013 2013 General Electric Company. All rights reserved. Data Sheet GE TM MicroTLynx 12A: Non-Isolated DC-DC Power Modules 2.4Vdc 5.5Vdc input 0.6Vdc to 3.63Vdc output 12A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN -0.3 6 Vdc Continuous Sequencing Voltage APTH VSEQ -0.3 ViN, Max Vdc Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 2.4 5.5 Vdc IN Maximum Input Current All IIN,max 11A Adc (VIN=2.4V to 5.5V, IO=IO, max ) Input No Load Current VO,set = 0.6 Vdc IIN,No load 36 mA (V = 5.0Vdc, I = 0, module enabled) V = 3.3Vdc I 81 mA IN O O,set IN,No load Input Stand-by Current All IIN,stand-by 3 mA (V = 5.0Vdc, module disabled) IN 2 2 Inrush Transient All It 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1 H source impedance V =0 to All 49 mAp-p IN 5.5V I = I See Test Configurations) , O Omax Input Ripple Rejection (120Hz) All -30 dB September 11, 2013 2013 General Electric Company. All rights reserved. Page 2