Data Sheet GE TM 12V Austin MiniLynx : SMT Non-Isolated DC-DC Power Modules 8.3Vdc 14Vdc input 0.75Vdc to 5.5Vdc output 3A Output Current Features RoHS Compliant Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to REACH Directive (EC) No 1907/2006 Delivers up to 3A output current High efficiency 91% at 3.3V full load (V = 12.0V) IN Small size and low profile: 20.3 mm x 11.4 mm x 7.27 mm (0.80 in x 0.45 in x 0.286 in) Low output ripple and noise Constant switching frequency (300 kHz) Output voltage programmable from 0.75 Vdc to 5.5 Vdc via external resistor Applications Line Regulation: 0.3% (typical) Distributed power architectures Load Regulation: 0.4% (typical) Intermediate bus voltage applications Temperature Regulation: 0.4 % (typical) Telecommunications equipment Remote On/Off Servers and storage applications Output overcurrent protection (non-latching) Networking equipment Wide operating temperature range (-40C to 85C) Enterprise Networks ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 Latest generation ICs (DSP, FPGA, ASIC) and Recognized, DIN VDE 0868-1/A11:2017 (EN62368- Microprocessor powered applications 1:2014/A11:2017 ISO** 9001 and ISO 14001 certified manufacturing facilities Description TM Austin MiniLynx 12V SMT (surface mount technology) power modules are non-isolated dc-dc converters that can deliver up to 3A of output current with full load efficiency of 91% at 3.3V output. These modules provide precisely regulated output voltage programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input voltage (VIN = 8.3 - 14V). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. In addition to sequencing, standard features include remote On/Off, programmable output voltage and over current protection. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards July 24, 2020 2015 General Electric Company. All rights reserved. Data Sheet GE TM 12V Austin MiniLynx : SMT Non-Isolated DC-DC Power Modules 8.3Vdc 14Vdc input 0.75Vdc to 5.5Vdc output 3A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All V -0.3 15 Vdc IN Continuous Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage Vo,set 3.63 VIN 8.3 12 14 Vdc Vo,set > 3.63 V 8.3 12 13.2 Vdc IN Maximum Input Current All I 2.2 Adc IN,max (VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc) Input No Load Current VO,set = 0.75Vdc IIN,No load 45 mA (VIN = VIN, nom Vdc, IO = 0, module enabled) VO,set = 5.5Vdc IIN,No load 150 mA Input Stand-by Current All I 1.2 mA IN,stand-by (VIN = 5.5Vdc, module disabled) 2 2 Inrush Transient All I t 0.4 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance VIN, min to VIN, All 30 mAp-p max, IO= IOmax See Test configuration section) Input Ripple Rejection (120Hz) All 30 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 6 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturers data sheet for further information. July 24, 2020 2015 General Electric Company. All rights reserved. Page 2