Data sheet Electronic timer CT-APS.12 OFF-delayed with 1 c/o (SPDT) contact The CT-APS.12 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S range are available with two different terminal versions. You can choose between the proven screw connection technology (double-chamber cage connection terminals) and the completely tool-free Easy Connect Technology (Push-in terminals). Characteristics Approvals UL 508, CAN/CSA C22.2 No.14 Rated control supply voltage 24-48 V DC, 24-240 V AC A OFF-delay timer with auxiliary voltage GL C 10 time ranges (0.05 s - 300 h) GOST D Control input with voltage-related triggering to start timing CB scheme K Precise adjustment by front-face operating elements CCC E Screw connection technology or Easy Connect Technology available Housing material for highest fire protection classification Kennzeichnungen UL 94 V-0 CE a Tool-free mounting on DIN rail as well as demounting C-Tick b 1 c/o (SPDT) contact Width of 22.5 mm 2 LEDs for status indication Order Data Electronic Timers Type Rated control supply voltage Connection technology Time ranges Order code CT-APS.12P 24-48 V DC, 24-240 V AC Push-in terminals 0.05 s - 300 h 1SVR 740 180 R3100 CT-APS.12S 24-48 V DC, 24-240 V AC Screw type terminals 0.05 s - 300 h 1SVR 730 180 R3100 Accessories Type Description Order code ADP.01 Adapter for screw mounting 1SVR 430 029 R0100 MAR.01 Marker label 1SVR 366 017 R0100 COV.11 Sealable transparent cover 1SVR 730 005 R0100 2CDC 251 037 V0011Connection technology Maintenance free Easy Connect Technology with Approved screw connection technology with Push-in terminals double-chamber cage connection terminals Type designation CT-xxS.yyP Type designation CT-xxS.yyS Push-in terminals Double-chamber cage connection terminals Tool-free connection of rigid and flexible wires with Terminal spaces for different wire sizes: wire end ferrule according to DIN 46228-1-A, fine -strand with/without wire end ferrule: DIN 46228-4-E 1 x 0.5-2.5 mm (2 x 20 - 14 AWG), Wire size: 2 x 0.5-1.5 mm, (2 x 20 - 16 AWG) 2 x 0.5-1.5 mm (2 x 20 - 16 AWG) Easy connection of flexible wires without wire end rigid: ferrule by opening the terminals 1 x 0.5-4 mm (1 x 20 - 12 AWG), No retightening necessary 2 x 0.5-2.5 mm (2 x 20 - 14 AWG) One operation lever for opening both connection One screw for opening and closing of both cages terminals Pozidrive screws for pan- or crosshead screwdrivers For triggering the lever and disconnecting of wires according to DIN ISO 2380-1 Form A 0.8 x 4 mm you can use the same tool (Screwdriver according to (0.0315 x 0.157 in), DIN ISO 8764-1 PZ1 4.5 mm DIN ISO 2380-1 Form A 0.8 x 4 mm (0.0315 x 0.157 (0.177 in) in), DIN ISO 8764-1 PZ1 4.5 mm (0.177 in)) Constant spring force on terminal point independent of the applied wire type, wire size or ambient conditions (e. g. vibrations or temperature changes) Opening for testing the electrical contacting Gas-tight Both the Easy Connect Technology with Push-in terminals and screw connection technology with double-chamber cage connection terminals have the same connection geometry as well as terminal position. 2 - Electronic timer CT-APS.12 Data sheet 2CDC 253 026 F0011 2CDC 253 025 F0011