Data Sheet GE FLT007A0Z/FLT007A0-SZ: Input Filter Modules 75Vdc Input Voltage Maximum 7A Output Current Maximum Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863. Compliant to REACH Directive (EC) No 1907/2006 Compatible in a Pb-free or SnPb reflow environment (Z versions) Surface Mount and Through hole versions Common-mode and Differential-mode filtering Small size and low profile 25.4 mm x 25.4 mm x 12.2 mm (1 x 1 x 0.48 in) Same footprint as FLTR75V5 module Applications Cost efficient open frame design Distributed power architectures Wide operating temperature range (-40C to +85C) Intermediate bus voltage applications Meets the voltage isolation requirements for Telecommunications equipment ETSI 300-132-2 and complies with and is licensed for Basic Insulation Wireless Base stations ANSI/UL* 62368-1 and CAN/CSA C22.2 No. Enterprise Networks 62368-1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368-1:2014/A11:2017) Industrial equipment CE mark meets 2014/35/EU directive Options ISO** 9001 and ISO 14001 certified manufacturing Surface Mount Interconnect (-SR) facilities Description The FLT007A0Z,FLT007A0-SRZ filter module is designed to operate over an input voltage range up to 75Vdc at output currents up to 7A in an ambient temperature of -40C to 85C. The filter module is optimized for use with dc/dc converter modules, to significantly reduce the conducted differential and common-mode noise returned to the power source. This filter module enables designers to meet the requirements of EMI standards CISPR 22 (EN55032) and FCC Class B by insertion in-line between the power source and the dc/dc converter module. These modules are designed and manufactured to be either surface mounted (-SR version) or through hole mounted on PCBs. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards March 18, 2021 2016 General Electric Company. All rights reserved. Data Sheet GE FLT007A0Z/FLT007A0-SZ: Input Filter Modules 75Vdc Input Voltage Maximum 7A Output Current Maximum Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All V 0 100 Vdc IN Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg I/O to Ground Isolation (100% Factory Tested) All 1500 Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 0 24/48 75 Vdc IN Maximum Input-to-Output Current (V = 0 to V ) All I 7 Adc IN iN,max max Resistance per leg All R 25 m CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 10 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturers data sheet for further information. March 18, 2021 2016 General Electric Company. All rights reserved. Page 2