FLT012A0Z ABB

Data Sheet GE FLT012A0Z/FLT012A0-SZ: Input Filter Modules 75Vdc Input Voltage Maximum 12A Output Current Maximum Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863. Compliant to REACH Directive (EC) No 1907/2006 Compatible in a Pb-free or SnPb reflow environment (Z versions) Surface Mount and Through hole versions Common-mode and Differential-mode filtering Small size and low profile 48.3 mm x 25.4 mm x 11.7 mm (1.9 in x 1.0 in x 0.46 in) RoHS Compliant Same footprint as FLTR100V10 module Cost efficient open frame design Wide operating temperature range (-40C to +85C) Applications Meets the voltage isolation requirements for ETSI 300-132-2 Distributed power architectures ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 Recognized, Wireless Networks DIN VDE 0868-1/A11:2017 (EN62368-1:2014/A11:2017) Enterprise Networks CE mark meets 2014/35/EC directive Access and Optical Network Equipment ISO** 9001 and ISO 14001 certified manufacturing facilities Options Surface Mount Interconnect (-S) Description The Filter module shall be designed to operate over an input voltage range up to 75Vdc at output current of 12A in an ambient temperature of -40C to 85C. The filter module shall be optimized for use with dc/dc converter modules, to significantly reduce the conducted differential and common-mode noise returned to the power source. The filter module shall enable designers to meet the requirements of EMI standards CISPR 22 (EN55032) and FCC Class B by inserting in-line between the power source and the dc/dc converter module. These modules shall be designed and manufactured to be either surface mounted(-S version) or through hole mounted on PCBs. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed. March 18, 2021 2016 General Electric Company. All rights reserved. Data Sheet GE FLT012A0Z/FLT012A0-SZ: Input Filter Modules 75Vdc Input Voltage Maximum 12A Output Current Maximum Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All V 0 75 Vdc IN Transient (100ms) V 0 100 V IN, TRANS Operating Ambient Temperature All T -40 85 C A Storage Temperature All T -55 125 C stg FLT012A0Z / 1500 Vdc FLT012A0-SZ I/O to Ground Isolation (100% Factory Tested) FLT012A0-11Z - - 2000 Vdc Input to GND Insulation 10 - M Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 0 24/48 75 Vdc IN Maximum Input-to-Output Current (V = 0 to V ) All I 12 Adc IN iN,max max Resistance per leg All R 20 m Maximum Average Current I max 12 A (T = 60C, 2.03 m/s (400lfm) air) A Maximum Average Current I 8 A max (TA = 60C, natural convection) CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 15 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturers data sheet for further information. March 18, 2021 2016 General Electric Company. All rights reserved. Page 2