M2M The measure of efficiencyThe importance of control Measurement and advanced analysis of electrical parameters To make equipment as efficient as possible, it is essential to know the details of its behaviour and consumption. This allows energy losses to be identified and eliminated as well as optimising the use of electricity. It is possible to perform more efficiently, starting with measuring the electrical parameters. The new M2M network analyser has advanced analysis Aside from optimising the use of loads, real time functions which allow effective measurement of the main measurement contributes to containing both environmental single-phase or three-phase electrical parameters: voltage, and budgetary impact. current, frequency, power factor, active and reactive power, All information gathered by the analyser can be transmitted active and reactive energy. quickly to remote locations through specific communication Fitted to low- and medium-voltage electrical panels, the new interfaces RS485 or RJ45, with the support of numerous analyser allows the measurement and analysis in real time of protocols including Modbus RTU, Modbus TCP/IP and electrical parameters, also verifying the quality of the energy Profibus DP. thanks to THD measurement. Interaction with the control and supervision systems is M2M also keeps the system s consumption under control, possible via different inputs and outputs, all programmable. giving figures in CO kg and Euros to ensure more efficient 2 and rational use of energy. Bidirectional metering of energy and power on the 4 quadrants allows both production and consumption of energy to be monitored with a single device. 2 M2M The measure of efficiency