Data Sheet GE Naos Raptor 20A: Non-Isolated DC-DC Power Modules 4.5Vdc 14Vdc input 0.59Vdc to 6Vdc output 20A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 (Z versions) Compliant to REACH Directive (EC) No 1907/2006 Compatible in a Pb-free or SnPb wave-soldering environment (Z versions) Wide input voltage range (4.5Vdc-14Vdc) Output voltage programmable from 0.59Vdc to 6Vdc via external resistor TM Tunable Loop to optimize dynamic output voltage response RoHS Compliant Fixed switching frequency Applications Output overcurrent protection (non-latching) Distributed power architectures Over temperature protection Intermediate bus voltage applications Remote On/Off Telecommunications equipment Remote Sense Servers and storage applications Power Good Signal Networking equipment Small size: 36.8 mm x 15.5 mm x 9.2 mm (1.45 in. x 0.61 in. x 0.36 in) Wide operating temperature range (-40C to 85C) ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368-1:2014/A11:2017) ISO** 9001 and ISO 14001 certified manufacturing facilities Description The Naos Raptor 20A SIP power modules are non-isolated dc-dc converters in an industry standard package that can deliver up to 20A of output current with a full load efficiency of 91% at 3.3Vdc output voltage (VIN = 12Vdc). These modules operate over a wide range of input voltage (VIN = 4.5Vdc-13.8Vdc) and provide a precisely regulated output voltage from 0.59Vdc to 6Vdc, programmable via an external resistor. Features include remote On/Off, TM adjustable output voltage, over current and over temperature protection. A new feature, the Tunable Loop , allows the user to optimize the dynamic response of the converter to match the load. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards February 19, 2021 2016 General Electric Company. All rights reserved. Data Sheet GE Naos Raptor 20A: Non-Isolated DC-DC Power Modules 4.5Vdc 14Vdc input 0.59Vdc to 6Vdc output 20A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All V -0.3 15 Vdc IN Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 4.5 12.0 13.8 Vdc IN Maximum Input Current All I 20 Adc IN,max (V = V to V , I =I V = 3.3Vdc) IN IN, min IN, max O O, max O,set Input No Load Current V = 0.6 Vdc I 50 mA O,set IN,No load (V = 12Vdc, I = 0, module ON) V = 5.0Vdc I 110 mA IN O O,set IN,No load Input Stand-by Current All I 6.08 mA IN,stand-by (V = 12Vdc, module disabled) IN 2 2 Inrush Transient All I t 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance V to All 34.4 mAp-p IN, min V I = I See Test configuration section) IN, max, O Omax Input Ripple Rejection (120Hz) All 43 dB February 19, 2021 2016 General Electric Company. All rights reserved. Page 2