Data Sheet GE TM 6A Digital PicoDLynx : Non-Isolated DC-DC Power Modules 3Vdc 14.4Vdc input 0.45Vdc to 5.5Vdc output 6A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863. Compliant to REACH Directive (EC) No 1907/2006 Compatible in a Pb-free or SnPb reflow environment Compliant to IPC-9592 (September 2008), Category 2, Class II DOSA based Wide Input voltage range (3Vdc-14.4Vdc) RoHS Compliant Output voltage programmable from 0.6Vdc to 5.5Vdc via external resistor. Digitally adjustable down to 0.45Vdc Applications TM Digital interface through the PMBus protocol Distributed power architectures TM Tunable Loop to optimize dynamic output voltage response Intermediate bus voltage applications Flexible output voltage sequencing EZ-SEQUENCE Telecommunications equipment Power Good signal Servers and storage applications Fixed switching frequency with capability of external Networking equipment synchronization Industrial equipment Output overcurrent protection (non-latching) Vin+ Vout+ VIN VOUT Over temperature protection VS+ PGOOD RTUNE Remote On/Off MODULE SEQ Ability to sink and source current CTUNE CLK Cin TRIM Co Cost efficient open frame design DATA ADDR0 SMBALRT RTrim Small size: 12.2 mm x 12.2 mm x 7.25 mm (0.48 in x ADDR1 0.48 in x 0.29 in) ON/OFF RADDR1 RADDR0 SIG GND Wide operating temperature range -40C to 105C SYNC GND VS- GND (Ruggedized: -D), 85C(Regular) ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368- 1:2014/A11:2017) ISO** 9001 and ISO 14001 certified manufacturing facilities Description TM The 6A Digital PicoDLynx power modules are non-isolated dc-dc converters that deliver up to 6A of output current. These modules operate over a wide range of input voltage (VIN = 3Vdc-14.4Vdc) and provide a precisely regulated output voltage from 0.45Vdc to 5.5Vdc, programmable via an external resistor and further adjustable through PMBus. Features include a digital interface using the PMBus protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The TM PMBus interface supports a range of commands to control and monitor the module. The Tunable Loop feature allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF) July 8, 2020 2016 General Electric Company. All rights reserved. Data Sheet GE TM 6A Digital PicoDLynx : Non-Isolated DC-DC Power Modules 3Vdc 14.4Vdc input 0.45Vdc to 5.5Vdc output 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN -0.3 15 V Continuous SEQ, SYNC, VS+ All 7 V CLK, DATA, SMBALERT All 3.6 V Operating Ambient Temperature All TA -40 85 C (see Thermal Considerations section) Storage Temperature All Tstg -55 125 C Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 3 14.4 Vdc IN Maximum Input Current All I 5 Adc IN,max (V =3V to 14V, I =I ) IN O O, max VO,set = 0.6 Vdc IIN,No load 30 mA Input No Load Current (VIN = 12Vdc, IO = 0, module enabled) V = 5Vdc I 90 mA O,set IN,No load Input Stand-by Current All IIN,stand-by 6 mA (V = 12Vdc, module disabled) IN 2 2 Inrush Transient All I t 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance V =0 to 14V All 11.2 mAp-p IN , IO= IOmax See Test Configurations) Input Ripple Rejection (120Hz) All -55 dB July 8, 2020 2016 General Electric Company. All rights reserved. Page 2