Data Sheet GE TM 12A Analog PicoDLynx : Non-Isolated DC-DC Power Modules 3Vdc 14.4Vdc input 0.6Vdc to 5.5Vdc output 12A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to REACH Directive (EC) No 1907/2006 Compatible in a Pb-free or SnPb reflow environment Compliant to IPC-9592 (September 2008), Category 2, Class II DOSA based Wide Input voltage range (3Vdc-14.4Vdc) Output voltage programmable from 0.6Vdc to 5.5Vdc RoHS Compliant via external resistor TM Tunable Loop to optimize dynamic output voltage Applications response Distributed power architectures Power Good signal Intermediate bus voltage applications Fixed switching frequency Telecommunications equipment Output overcurrent protection (non-latching) Servers and storage applications Overtemperature protection Networking equipment Remote On/Off Industrial equipment Ability to sink and source current Vin+ Vout+ Cost efficient open frame design VIN VOUT SENSE Small size: 12.2 mm x 12.2 mm x 8.5 mm PGOOD (0.48 in x 0.48 in x 0.335 in) RTUNE MODULE Wide operating temperature range -40C to 105C(Ruggedized: -D), 85C(Regular) Cin Co CTUNE ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 ON/OFF TRIM Recognized, DIN VDE 0868-1/A11:2017 (EN62368- 1:2014/A11:2017 RTrim GND ISO** 9001 and ISO 14001 certified manufacturing facilities Description TM The 12A Analog PicoDLynx power modules are non-isolated dc-dc converters that can deliver up to 12A of output current. These modules operate over a wide range of input voltage (V = 3Vdc-14.4Vdc) and provide a precisely regulated output voltage IN from 0.6Vdc to 5.5Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over TM current and over temperature protection. The Tunable Loop feature allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards July 9, 2020 2014 General Electric Company. All rights reserved. GE Data Sheet TM 12A Analog PicoDLynx : Non-Isolated DC-DC Power Modules 3Vdc 14.4Vdc input 0.6Vdc to 5.5Vdc output 12A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All V -0.3 15 Vdc IN Continuous Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) -D version T -40 105 C A Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 3 14.4 Vdc Maximum Input Current All IIN,max 12 Adc (VIN=3V to 14V, IO=IO, max ) VO,set = 0.6 Vdc IIN,No load 45 mA Input No Load Current (V = 12.0Vdc, I = 0, module enabled) IN O VO,set = 5Vdc IIN,No load 75 mA Input Stand-by Current All I 0.65 mA IN,stand-by (VIN = 12.0Vdc, module disabled) 2 2 Inrush Transient All I t 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance VIN =0 to All 40 mAp-p 14V I = I See Test Configurations) , O Omax Input Ripple Rejection (120Hz) All -60 dB July 9, 2020 2014 General Electric Company. All rights reserved. Page 2