Data Sheet System pro M compact Miniature Circuit Breaker SU 200 M for branch circuit protection acc. to UL 489 Features The miniature circuit breaker SU 200 M High performance MCB with 10 kA interrupting capacity is ABBs solution for UL 489 branch acc. to UL 489 / CSA 22.2 No. 5 and 15 kA breaking circuit protection up to 480 Y/277 V AC capacity acc. to IEC/EN 60947-2 Certified up to I = 40 A at 480 Y/277 V AC acc. to n and 96 V DC. This circuit breaker is UL 489 / CSA 22.2 No. 5 an all-round device for AC and DC Certified for AC and DC use acc. to UL and CSA applications for universal use in North 40 C reference temperature acc. to UL and CSA Current limiting acc. to UL 489 American and global markets due to Clear contact position indication in red/green (real CPI) its approvals acc. to the international standards UL, CSA and IEC. Moreover, Standards and approvals SU 200 M is fully compatible with Standards System pro M compact UL 489 UL 489 accessories. CSA 22.2 No. 5 IEC/EN 60947-2 Approvals UL 489 US CSA 22.2 No. 5 CA VDE DE CCC CN 2CDC021004S0014 2CDC021046S0014Miniature Circuit Breaker SU 200 M Technical data General Data Standards UL 489, CSA 22.2 No. 5, IEC/EN 60947-2 Poles 1P, 2P, 3P, 4P Tripping characteristics C, K, Z Rated current I 0.2 - 63 A n Rated frequency f 50 / 60 Hz, DC (0 Hz) Rated insulation voltage U acc. to IEC/EN 60664-1 250 V AC (phase to ground), 440 V AC (phase to phase) i Overvoltage category III Pollution degree 3 IEC/EN 60947-2 Rated operational voltage U 1P: 230 V AC 2P, 3P, 4P: 400 V AC e Max. power frequency recovery voltage U AC 1P: 253 V AC 2P, 3P, 4P: 440 V AC max Min. operating voltage 12 V AC, 12 V DC Rated ultimate short-circuit breaking capacity I 15 kA cu Rated service short-circuit breaking capacity I 40 A: 11.25 kA cs > 40 A: 7.5 kA Rated impulse withstand voltage U (1.2/50s) 4 kV (test voltage 6.2 kV at sea level, 5 kV at 2,000 m) imp Dielectric test voltage 2 kV (50 / 60Hz, 1 min.) Reference temperature for tripping characteristics 30 C Electrical endurance I < 30 A: 20,000 ops (AC), I 30 A: 10,000 ops. (AC) n n 1 cycle (2 s - ON, 13 s - OFF, I 32 A), 1 cycle (2 s - ON, 28 s - OFF, I > 32 A) n n UL / CSA Rated voltage AC 1P: 277 V AC up to 40 A for C, Z char., AC 277 V AC up to 35 A for K char., 240 V AC AC 2P, 3P, 4P: 480 Y / 277 V AC up to 40 A for C, Z char., AC 480 Y / 277 V AC up to 35 A for K char., 240 V AC DC 1P: 48 V DC 2P: 96 V DC (2p in series) Rated interrupting capacity acc. to UL 1077 Short-circuit current rating acc. to UL 489 10 kA Application Reference temperature for tripping characteristics 40 C Electrical endurance 6,000 ops (AC), 6,000 ops. (DC) 1 cycle (1 s - ON, 9 s - OFF) Mechanical data Housing Insulation group II, RAL 7035 Toggle Insulation group II, black, sealable Contact position indication Real CPI (green OFF / red ON) Protection degree acc. to DIN EN 60529 IP20*, IP40 in enclosure with cover Mechanical endurance 20,000 ops. Shock resistance acc. to IEC/EN 60068-2-27 25 g - 2 shocks - 13 ms Vibration resistance acc. to IEC/EN 60068-2-6 5g - 20 cycles at 51505 Hz with load 0.8 I n Environmental conditions (damp heat cyclic) acc. to IEC/EN 60068-2-30 28 cycles with 55C/90-96% and 25C/95-100% Ambient temperature -25 +55C Storage temperature -40 ... +70 C Installation Terminal Failsafe bi-directional cylinder-lift terminal Cross-section of conductors (top/bottom) solid, stranded: 35 mm / 35 mm 2 2 flexible: 25 mm / 25 mm 18 4 AWG Cross-section of busbars (top/bottom) 10 mm / 10 mm 18 8 AWG Torque 2.8 Nm AWG 18-16: 13.3 in-lbs. AWG 14-10: 17.7 in-lbs. AWG 8-4: 39.8 in-lbs. Screwdriver No. 2 Pozidrive Mounting On DIN rail 35 mm acc. to EN 60715 by fast clip Mounting position any Supply optional Dimensions and weight Mounting dimensions acc. to DIN 43880 Mounting dimension 3 Pole dimensions (H x D x W) 111 x 69 x 17.5 mm Pole weight approx. 125 g Combination with auxiliary elements Auxiliary contact Yes Signal contact Yes Shunt trip Yes * Also fulfilling the requirements acc. to the protection degree IPXXB 2 - 2CDC002177D0202