Data Sheet GE TM 35A Digital MicroDLynxII : Non-Isolated DC-DC Power Modules 4.5Vdc 14.4Vdc input 0.51Vdc to 3.63Vdc output 35A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863. Compatible in a Pb-free or SnPb reflow environment (Z versions) Compliant to IPC- 9592 (September 2008), Category 2, Class I Compliant to REACH Directive (EC) No 1907/2006 DOSA based Wide Input voltage range (4.5Vdc-14.4Vdc) Output voltage programmable from 0.51Vdc to 3.63Vdc via TM external resistor and PMBus TM Digital interface through the PMBus protocol RoHS Compliant TM Tunable Loop to optimize dynamic output voltage Applications response Distributed power architectures Flexible output voltage sequencing EZ-SEQUENCE Intermediate bus voltage applications Power Good signal Telecommunications equipment Fixed switching frequency with capability of external synchronization Servers and storage applications Output over current protection (non-latching) Networking equipment Over temperature protection Industrial equipment Remote On/Off Vin+ Vout+ Ability to sink and source current VIN VOUT VS+ PGOOD Cost efficient open frame design RTUNE MODULE Small size: 20.32 mm x 11.45 mm x 11 mm (0.8 in x 0.45 in SEQ x 0.433 in) CTUNE CLK Cin TRIM Co Wide operating temperature range -40C to 85C DATA ADDR0 SMBALRT RTrim ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 ADDR1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368- ON/OFF RADDR1 RADDR0 SYNC 1:2014/A11:2017) SIG GND GND VS- ISO** 9001 and ISO 14001 certified manufacturing facilities GND Description TM The 35A Digital MicroDLynxII power modules are non-isolated dc-dc converters that can deliver up to 35A of output current. These modules operate over a wide range of input voltage (V = 4.5Vdc-14.4Vdc) and provide a precisely regulated output voltage IN TM from 0.51Vdc to 3.63Vdc, programmable via an external resistor and PMBus control. Features include a digital interface using TM TM the PMBus protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The PMBus TM interface supports a range of commands to both control and monitor the module. The module also includes the Tunable Loop feature that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF) September 11, 2020 2017 General Electric Company. All rights reserved. Data Sheet GE TM 35A Digital MicroDLynxII : Non-Isolated DC-DC Power Modules 4.5Vdc 14.4Vdc input 0.51Vdc to 3.63Vdc output 35A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All V -0.3 15 V IN Continuous VS, ON/OFF, SEQ All 7 V CLK, DATA, SMBALERT ,SYNC All -0.3 3.6 V Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 4.5 14.4 Vdc Maximum Input Current All I 33 Adc IN,max (VIN=4.5V to 14V, IO=IO, max ) V = 0.6 O,set IIN,No load 43 mA Input No Load Current Vdc (VIN = 12Vdc, IO = 0, module enabled) V = O,set IIN,No load 106 mA 3.63Vdc Input Stand-by Current All IIN,stand-by 16 mA (VIN = 12Vdc, module disabled) 2 2 Inrush Transient All I t 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance V =0 to 14V I = I All 35 mAp-p IN , O Omax See Test Configurations) Input Ripple Rejection (120Hz) All -71 dB Output Voltage Set-point accuracy over entire output range 0 to 85C, Vo=over entire range All VO, set -0.5 +0.5 % VO, set -40 to 85C, Vo=over entire range All VO, set -1 +1 % VO, set 1 Voltage Regulation Line Regulation (VIN=VIN, min to 3 mV V ) IN, max Load (IO=IO, min to IO, max) Regulation All 5 mV 1 Worst case Line and load regulation data, all temperatures, from design verification testing as per IPC9592. September 11, 2020 2017 General Electric Company. All rights reserved. Page 2