Datasheet GE TM 2 6A Analog Dual Output MicroDLynx : Non-Isolated DC-DC Power Modules 4.5Vdc 14.4Vdc input 0.6Vdc to 5.5Vdc output 2 6A Output Current Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863. Compliant to IPC-9592 (September 2008), Category 2, Class II Compatible in a Pb-free or SnPb reflow environment (Z versions) Compliant to REACH Directive (EC) No 1907/2006 Wide Input voltage range (4.5Vdc-14.4Vdc) on both inputs Each Output voltage programmable from 0.6Vdc to 5.5Vdc via external resistor. RoHS Compliant TM Tunable Loop to optimize dynamic output voltage response Power Good signal for each output Fixed switching frequency with capability of external Applications synchronization 180 Out-of-phase inputs to reduce input ripple Distributed power architectures Output overcurrent protection (non-latching) Intermediate bus voltage applications Output Overvoltage protection Telecommunications equipment Over temperature protection Servers and storage applications Remote On/Off Networking equipment Ability to sink and source current Industrial equipment Start up into Pre-biased output Vin+ Vout+ VIN1 VOUT1 Cost efficient open frame design VS+1 PGOOD1 RTUNE1 Small size: 20.32 mm x 11.43 mm x 8.5 mm MODULE SYNC CTUNE1 (0.8 in x 0.45 in x 0.335 in) CI3 CI2 CI1 TRIM1 CO1 CO2 CO3 Wide operating temperature range -40C to ADDR1 RTrim1 105C(Ruggedized: -D), 85C(Regular) ON/OFF1 Sig GND SIG GND Ruggedized (-D) version able to withstand high levels of shock PGND PGND and vibration GND RTrim2 ON/OFF2 TRIM2 ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 Recognized, PGOOD2 RTUNE2 DIN VDE 0868-1/A11:2017 (EN62368-1:2014/A11:2017) CO4 CO5 CO6 CTUNE2 VS+2 ISO** 9001 and ISO 14001 certified manufacturing facilities VOUT2 VIN2 Description TM The 2 6A Analog Dual MicroDlynx power modules are non-isolated dc-dc converters that can deliver up to 2 6A of output current. These modules operate over a wide range of input voltage (V = 4.5Vdc-14.4Vdc) and provide precisely regulated output voltages from IN 0.6Vdc to 5.5Vdc. Features include remote On/Off, adjustable output voltage, over current and over temperature protection. The TM module also includes the Tunable Loop feature that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards October 28, 2020 2015 General Electric Company. All rights reserved. Datasheet GE TM 2 6A Analog Dual MicroDlynx : Non-Isolated DC-DC Power Modules 4.5Vdc 14.4Vdc input 0.6Vdc to 5.5Vdc output 2 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN1 and VIN2 -0.3 15 V Continuous VS+1, VS+2, All -0.3 7 V Operating Ambient Temperature All TA -40 85 C (see Thermal Considerations section) -D Version TA -40 105 C Storage Temperature All Tstg -55 125 C Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V and V 4.5 14.4 Vdc IN1 IN2 IIN1,max & Maximum Input Current All 12 Adc IIN2,max (V =3V to 14.4V, I =I ) IN O O, max I & IN1,No load VO,set = 0.6 Vdc 40 mA Input No Load Current IIN2,No load (VIN = 12Vdc, IO = 0, module enabled) I & IN,1No load V = 5.5Vdc 140 mA O,set IIN2,No load Input Stand-by Current I & IN1,stand-by All 14 mA (V = 12Vdc, module disabled) I IN IN2,stand-by 2 2 2 Inrush Transient All I1 t & I2 t 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance VIN =4.5 to 14V, All Both Inputs 25 mAp-p IO= IOmax See Test Configurations) Input Ripple Rejection (120Hz) All Both Inputs -68 dB October 28, 2020 2015 General Electric Company. All rights reserved. Page 2