S-5718 Series LOW VOLTAGE OPERATION OMNIPOLAR / UNIPOLAR DETECTION TYPE www.ablic.com HALL EFFECT SWITCH IC WITH SWITCHABLE DETECTION POLE FUNCTION www.ablicinc.com ABLIC Inc., 2017 Rev.1.1 01 This IC, developed by CMOS technology, is a high-accuracy Hall effect switch IC with switchable detection pole function that operates at a low voltage and low current consumption. The output voltage changes when this IC detects the intensity level of magnetic flux density of the polarity according to the input pin status. The inclusion of a switchable detection pole function makes it possible to reduce the number of parts and realize a variety of different systems by using this IC with a magnet. High-density mounting is possible by using the super small SNT-4A package. Due to its low voltage operation and low current consumption, this IC is suitable for battery-operated portable devices. Its high-accuracy magnetic characteristics also allow this IC to reduce operation dispersion in magnet combination systems. ABLIC Inc. offers amagnetic simulation servic that provides the ideal combination of magnets and our Hall effect ICs for customer systems. Our magnetic simulation service will reduce prototype production, development period and development costs. In addition, it will contribute to optimization of parts to realize high cost performance. For more information regarding our magnetic simulation service, contact our sales office. Features Switchable detection pole function: Omnipolar detection, S pole detection, N pole detection *1 Output logic: Active Active Output form: CMOS output *1 Magnetic sensitivity (hysteresis width): B = 1.8 mT typ. (B = 0.7 mT typ.) OP HYS B = 3.0 mT typ. (B = 0.8 mT typ.) OP HYS B = 3.0 mT typ. (B = 1.3 mT typ.) OP HYS B = 4.5 mT typ. (B = 1.0 mT typ.) OP HYS B = 4.5 mT typ. (B = 2.5 mT typ.) OP HYS *1 Operating cycle (current consumption): t = 102.1 ms typ. (I = 1.4 A typ.) CYCLE DD t = 50.5 ms typ. (I = 2.0 A typ.) CYCLE DD t = 5.7 ms typ. (I = 12.0 A typ.) CYCLE DD *2 Power supply voltage range: V = 1.45 V to 3.6 V DD Operation temperature range: Ta = 40C to 85C Lead-free (Sn 100%), halogen-free *1. The option can be selected. *2. Power supply voltage range is different by optional combination. Applications Mobile phone, smart phone Notebook PC, tablet PC Wearable device Plaything, portable game Home appliance Package SNT-4A 1 LOW VOLTAGE OPERATION OMNIPOLAR / UNIPOLAR DETECTION TYPE HALL EFFECT SWITCH IC WITH SWITCHABLE DETECTION POLE FUNCTION S-5718 Series Rev.1.1 01 Block Diagram VDD *1 Detection pole Control circuit *1 switching circuit Chopping SWP OUT stabilized amplifier *1 *1 *1 VSS *1. Parasitic diode Figure 1 2