S-576Z B Series 125C OPERATION, HIGH-WITHSTAND VOLTAGE, HIGH-SPEED, www.ablic.com TM ZCL HALL EFFECT IC ABLIC Inc., 2019-2020 Rev.1.1 00 This IC, developed by CMOS technology, is a high-accuracy Hall effect IC that operates with high temperature and high-withstand voltage. The IC switches output voltage level when the IC detects magnetic flux density (magnetic field) polarity changes. The ZCL (Zero Crossing Latch) detection method realizes polarity changes detection with the higher accuracy than the conventional bipolar latch method. Using this IC with a magnet makes it possible to detect the rotation status in various devices. ABLIC Inc. offers amagnetic simulation servic that provides the ideal combination of magnets and our Hall effect ICs for customer systems. Our magnetic simulation service will reduce prototype production, development period and development costs. In addition, it will contribute to optimization of parts to realize high cost performance. For more information regarding our magnetic simulation service, contact our sales representatives. Features Uses a thin (t0.80 mm max.) TSOT-23-3S or ultra-thin (t0.50 mm max.) HSNT-6(2025) package, allowing for device miniaturization Contributes to reduction of mechanism operation dispersion through high accuracy detection of magnetic flux density (magnetic field) polarity changes Contributes to device safe design with a built-in output current limit circuit Specifications Applications Pole detection: ZCL detection DC brushless motor *1 Output logic : V = at S pole detection Home appliance OUT V = at S pole detection Housing equipment OUT *1 Output form : Nch open-drain output Industrial equipment Nch driver + built-in pull-up resistor (1.2 k typ.) Zero crossing latch point: B = 0.0 mT typ. Z *1 Release point (S pole) : B = 3.0 mT typ. RS B = 6.0 mT typ. RS Chopping frequency: f = 500 kHz typ. C Packages Output delay time: t = 8.0 s typ. D *2 TSOT-23-3S Power supply voltage range : V = 2.7 V to 26.0 V DD HSNT-6(2025) Built-in regulator Built-in output current limit circuit Operation temperature range: Ta = 40C to +125C Lead-free (Sn 100%), halogen-free *1. The option can be selected. *2. V = 2.7 V to 5.5 V when output form is Nch driver + built-in pull-up resistor (1.2 k typ.) DD 1 TM 125C OPERATION, HIGH-WITHSTAND VOLTAGE, HIGH-SPEED, ZCL HALL EFFECT IC S-576Z B Series Rev.1.1 00 Block Diagrams 1. Nch open-drain output product VDD Regulator OUT *1 Chopper stabilized amplifier Output current limit circuit VSS *1. Parasitic diode Figure 1 2. Nch driver + built-in pull-up resistor product VDD Regulator OUT *1 Chopper stabilized amplifier Output current limit circuit VSS *1. Parasitic diode Figure 2 2