S-93L76A LOW VOLTAGE OPERATION 2 3-WIRE SERIAL E PROM www.sii-ic.com SII Semiconductor Corporation, 2004-2015 Rev.6.0 02 2 The S-93L76A is a low voltage operating, high speed, low current consumption, 3-wire serial E PROM with a wide operating voltage range. The S-93L76A has the capacity of 8 K-bit, and the organization is 512-word 16 bit. It is capable of sequential read, at which time addresses are automatically incremented in 16-bit blocks. The communication method is by the Microwire bus. Features Operating voltage range: Read 1.6 V to 5.5 V Write 1.8 V to 5.5 V (WRITE, ERASE) 2.7 V to 5.5 V (WRAL, ERAL) Operating frequency: 2.0 MHz (Vcc = 4.5 V to 5.5 V) Write time: 10.0 ms max. Sequential read capable Write protect function during the low power supply voltage 6 *1 Endurance: 10 cycles / word (Ta = +85C) Data retention: 100 years (Ta = +25C) 20 years (Ta = +85C) Memory capacity: 8 K-bit Initial delivery state: FFFFh Operation temperature range: Ta = 40C to +85C *2 Lead-free, Sn 100%, halogen-free *1. For each address (Word: 16-bit) *2. Refer to Product Name Structure for details. Packages 8-Pin SOP (JEDEC) 8-Pin TSSOP TMSOP-8 Caution This product is intended to use in general electronic devices such as consumer electronics, office equipment, and communications devices. Before using the product in medical equipment or automobile equipment including car audio, keyless entry and engine control unit, contact to SII Semiconductor Corporation is indispensable. 1 2 LOW VOLTAGE OPERATION 3-WIRE SERIAL E PROM S-93L76A Rev.6.0 02 Pin Configurations 1. 8-Pin SOP (JEDEC) 8-Pin SOP (JEDEC) Table 1 Top view Pin No. Symbol Description 1 CS 1 8 Chip select input 2 SK Serial clock input 2 7 3 DI Serial data input 3 6 4 DO Serial data output 4 5 5 GND Ground *1 6 TEST Test Figure 1 7 NC No connection 8 VCC Power supply S-93L76AD0I-J8T1x *1. Connect to GND or VCC. Even if this pin is not connected, performance is not affected so long as the absolute maximum rating is not exceeded. 2. 8-Pin TSSOP 8-Pin TSSOP Table 2 Top view Pin No. Symbol Description 1 8 1 CS Chip select input 2 7 2 SK Serial clock input 3 6 4 5 3 DI Serial data input 4 DO Serial data output 5 GND Ground Figure 2 *1 6 TEST Test 7 NC No connection S-93L76AD0I-T8T1x 8 VCC Power supply *1. Connect to GND or VCC. Even if this pin is not connected, performance is not affected so long as the absolute maximum rating is not exceeded. Remark 1. Refer to the Package drawings for the details. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. 2