32.768kHz WATCH CRYSTAL, 6.2 x 02.1MM CYLINDER PACKAGE AB26T RoHS Pb 6.2 x 02.1 mm Compliant APPLICATIONS: FEATURES: Watch frequency Real time clock 32.768kHz standard frequency Measuring instruments Clock source for communication or A/V equipment STANDARD SPECIFICATIONS: PARAMETERS AB26T Series ABRACON P/N: Standard frequency: 32.768kHz 32.000kHz, 36.000kHz, 38.000kHz, 38.400kHz, 40.000kHz, Additional frequencies * For additional frequencies please contact Abracon. 60.000kHz, 65.536kHz, 76.800kHz, 96.000kHz, 100.000kHz available* Frequency range: 30kHz to 200kHz Operating temperature: -10C to + 60C (see option) Storage temperature: -40C to + 85C Turn-over temperature: +25C 5C Frequency tolerance: 20 ppm max. for 32.768kHz (see option) 30 ppm max. for 30kHz ~ 200kHz (not including 32.768kHz) -0.034 0.006 ppm/ T Temperature Coefficient: Equivalent series resistance: 35 k max. (32.768kHz) 35 k ~ 50 k max. (30kHz ~ 200kHz) Shunt capacitance C0: 0.8pF to 1.7pF typ. Load capacitance CL: 12.5 pF typ. (see option) Motional capacitance C1: 1 ~ 4 fF typ. Capacitance ratio: 425 ~ 800 typ. Quality factor: 70,000 typ. (32.768kHz) Drive level: 1.0 W max. Aging 25 C first year: 3 ppm max. (32.768kHz) and 5 ppm max. (others) Insulation resistance: 500 Mohms min. at 100Vdc 15V OPTIONS & PART IDENTIFICATION: (Left blank if standard) OUTLINE DRAWING: Dimensions: Inch (mm) AB26T- Frequency- - CL Option Temperature options Please specify load cap. E 0C to + 70C 0.236 Min in pF (ex. 6pF) B -20C to + 70C 6 Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.29.10 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CECERRTIFIED TIFIED www.abracon.com tel 949-546-8000 fax 949-546-800132.768kHz WATCH CRYSTAL, 6.2 x 02.1MM CYLINDER PACKAGE AB26T RoHS Pb 6.2 x 02.1 mm Compliant TUNING FORK CRYSTAL TEMPERATURE CURVE Typical Frequency Stability vs. Temperature 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Temperatue ( C) HANDLING INSTRUCTIONS Mounting: (1) Soldering on the body of the cylinder type crystal unit must be strictly avoided due to deteriorate the characteristics or damage the products. Rubber adhesive is recommended. (2) When the leads need to be bent by hand, follow the instructions below. - Hold the body of the Cylinder type crystal unit in fingers. - Pick at the part with tweezers, which you intend to bend. There should be more than 1.5mm (3.0mm is recommendable) from the body case. - Bend the lead 90 by tweezers without pulling the lead strongly. Pulling the leads forcefully may cause cracks in the glass hermetic seal resulting in component failure. ATTENTION: Abracon Corporations products are COTS Commercial-Off-The-Shelf products suitable for Commercial, Industrial and, where designated, Automo- tive Applications. Abracons products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requir- ing high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.29.10 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CECERRTIFIED TIFIED www.abracon.com tel 949-546-8000 fax 949-546-8001 dF/F (ppm)