Bluetooth Module RoHS/RoHS II compliant ABBTM-NVC-MDCS56 Pb 23.24 x 11.93 x 2.05 mm SMT Moisture Sensitivity Level (MSL) Level 3 Note: MSL3 packaging applies to MOQ of (50) units. Devices sold in less than MOQ quantities will be provided in an ESD bag with Desiccant. FEATURES: APPLICATIONS: Bluetooth v2.1+EDR Class2 Automobile Hands free applications +4dBm TX power, -86.0dBm RX sensitivity High quality Stereo Headset Support Profiles: HFP, A2DP, AVRCP, SPP, iAP over Bluetooth speakers Bluetooth for Apple VoIP handsets UART/I2C master MP3 players 12 digital PIOs Support PCM interface (SPDIF ,I2S) Software Support Apt-X ,AAC, Apt-XLL, SBC codec. Wakeup interrupt and watchdog timer 23.24mm x 11.93mm x 2.05mm SMT pads for easy and reliable PCB mounting, FCC ID: OC3BM1856* QDID: B019582* *Note: ABBTM-NVC-MDCS56 crosses to NovaComm P/N: NVC-MDCS56. BQB/FCC/CE certification documentation is under P/N: NVC-MDCS56 GENERAL DESCRIPTION ABBTM-NVC-MDCS56 is a class 2 Bluetooth 2.1+EDR (Enhanced Data Rate) module, based on NovaComms proprietary technology. It uses CSRs BlueCore5-Multimedia. With internal DSP and audio codec, it is an ideal solution for integrating Bluetooth audio functions into various products with minima efforts. With NovaComms iNova stack, designers can easily customize their applications to support different Bluetooth profiles, such as HFP, A2DP, AVRCP, SPP. The module has a 16M bits flash to support different combinationof profiles. And with the built-in firmware, the module can also be connected with Apples Authentication Coprocessor to build an iAP over Bluetooth application. Please contact Abracon for more applications. PIN CONFIGURATION: PIN DESCRIPTION: Pin Symbol I/O Type Description 1 GND Ground Ground Active LOW reset, input debounced so 2 RESETB CMOS input with weak internal pull-up must be low for >5ms to cause a reset Serial Peripheral interface clock for 3 SPI CLK input with weak internal pull-down programming only Serial Peripheral Interface output for 4 SPI MISO CMOS output, tri-state, with weak internal pull-down programming only Serial Peripheral Interface input for 5 SPI MOSI CMOS input, with weak internal pull-down programming only Figure 1. Pinout (Topview) Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.14.13 ABRACON IS ABRACON IS 92688 ISO 9001 / QS 9000 ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California CECERRTIFIED TIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.comBluetooth Module RoHS/RoHS II compliant ABBTM-NVC-MDCS56 Pb 23.24 x 11.93 x 2.05 mm SMT PIN DESCRIPTION Pin Symbol I/O Type Description Chip select for Synchronous Serial Interface for 6 SPI CSB CMOS input with weak internal pull-up programming only, active low Bi-directional with programmable 7 PIO3 Programmable input/output line strength internal pull-up/down Bi-directional with programmable 8 PIO11 Programmable input/output line strength internal pull-up/down CMOS output, tri-state, with weak 9 PCM OUT Synchronous Data Output internal pull-down 10 MIC RP Analogue Microphone input positive, right 11 MIC RN Analogue Microphone input negative, right Bi-directional with programmable 12 PIO0 Programmable input/output line strength internal pull-up/down Bi-directional with programmable 13 PIO1 Programmable input/output line strength internal pull-up/down CMOS Input, with weak internal pull- 14 PCM IN Synchronous Data Input down 15 GND Ground Ground Bi-directional with weak internal pull- 16 PCM SYNC Synchronous Data Sync down 17 RF GND RF Ground RF ground 18 RF IN RF RF Transceiver input/output line 19 RF GND RF Ground RF ground Bi-directional with weak internal pull- 20 PCM CLK Synchronous Data Clock down 21 AIO1 Bi-directional Analogue programmable input/output line 22 GND Ground Ground 23 MIC LP Analogue Microphone input positive, left 24 MIC LN Analogue Microphone input negative, right 25 SPK LN Analogue Speaker output negative, left 26 SPK LP Analogue Speaker output positive, left 27 SPK RN Analogue Speaker output negative, right 28 SPK RP Analogue Speaker output positive, right 29 AIO0 Bi-directional Analogue programmable input/output line 30 VDD 3V3 power input 3V3 power input USB data plus with selectable internal 1.5K pull 31 USB DP Bi-directional up resistor 32 USB DN Bi-directional USB data minus 33 GND Ground Ground Bi-directional with programmable 34 PIO14 Programmable input/output line strength internal pull-up/down Bi-directional with programmable 35 PIO9 Programmable input/output line strength internal pull-up/down Bi-directional with programmable 36 PIO4 Programmable input/output line strength internal pull-up/down 37 GND Ground Ground Bi-directional CMOS output, tri-state, 38 UART TX UART data output with weak internal pull-up CMOS input with weak internal pull- 39 UART RX UART data input down Bi-directional with programmable 40 PIO8 Programmable input/output line strength internal pull-up/down Bi-directional with programmable 41 PIO7 Programmable input/output line strength internal pull-up/down Bi-directional with programmable 42 PIO6 Programmable input/output line strength internal pull-up/down Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.14.13 ABRACON IS ABRACON IS 92688 ISO 9001 / QS 9000 ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California CECERRTIFIED TIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.com