Ultra Low Phase Noise XO / VCXO
RoHS Compliant
ESD Sensitive Pb
ABLNO
14.3 x 8.7 x 5.5mm
FEATURES:
APPLICATIONS:
High, 3rd Overtone Crystal Technology
Satellite Modem Communication Systems
Ultra Low Phase Noise -162 dBc/Hz Typ. @ 10kHz offset, 100MHz carrier
COTS - Military communications
Standard LVCMOS RF Output
Avionics
Wide Operating Temperature (-40C to +85C) standard
Low Phase Noise Signal Sources
28 ppm Max. All inclusive Stability (including Aging) over 10-years High Definition TV
Available Frequency range from 50MHz to 156.25MHz Test & Measurement
9.2 x 14.8mm RoHS Compliant SMT package Ultra Low Jitter RF Communication Circuitry
STANDARD SPECIFICATIONS
Parameters Minimum Typical Maximum Units Notes
RF Output Frequency Range 50.00 156.250 MHz
50.00MHz, 80.00MHz, 81.92MHz, 92.16MHz,
Custom
96.00MHz, 98.304MHz, 100MHz, 104.00MHz, frequencies
Standard Available Frequencies
available upon
106.25MHz, 120.00MHz, 122.88MHz, 125.00MHz,
request
150.00MHz, 155.52MHz & 156.250MHz
Supply Voltage (Vdd) 3.135 3.300 3.465 Volts
50MHz ~ 99.999MHz 25.00
Current
Drain 100MHz ~ 149.999MHz 35.00 mA
150.00MHz 40.00
Waveform LVCMOS
Output Load 15 pF
V 0.9*Vdd Volts
OH
V 0.1*Vdd
OL
Symmetry 45 50 55 %
Rise & Fall Times 3.0 ns
Operating Temperature Range -40 +85 C
Frequency Stability
Relative to
Over (-40 C to +85C) 12.00 18.00 ppm measured
frequency @ 25C
ALL effects, including Aging 28.00 ppm
Storage Temperature Range -40 +90 C
First Year 2.00 ppm
Aging 5-Years 5.00 ppm
10-Years 7.00 ppm
Vdd=3.3V
Phase Noise (50MHz Carrier)
@ 10 Hz offset -90 -82 dBc/Hz Note #1 & #2
@ 100 Hz offset -120 -115 dBc/Hz
@ 1,000 Hz offset -145 -140 dBc/Hz
@ 10,000 Hz offset -165 -160 dBc/Hz
@ 100,000 Hz offset -166 -165 dBc/Hz
@ 1,000,000 Hz offset -166 -165 dBc/Hz
Femto
rms Jitter (12kHz ~ 20MHz BW) < 100 125 0.125 ps Max.
Seconds
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 10.05.15
ABRACON IS ABRACON IS
ISO9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001
LLC
CECERRTIFIED TIFIED
Visit www.abracon.com for Terms and Conditions of SaleUltra Low Phase Noise XO / VCXO
RoHS Compliant
ESD Sensitive Pb
ABLNO
14.3 x 8.7 x 5.5mm
Parameters Minimum Typical Maximum Units Notes
Vdd=3.3V
Phase Noise (100MHz Carrier)
@ 10 Hz offset -88 -82 dBc/Hz Note #1 & #2
@ 100 Hz offset -118 -115 dBc/Hz
@ 1,000 Hz offset -141 -138 dBc/Hz
@ 10,000 Hz offset -160 -155 dBc/Hz
@ 100,000 Hz offset -161 -160 dBc/Hz
@ 1,000,000 Hz offset -165 -160 dBc/Hz
Femto
rms Jitter (12kHz ~ 20MHz BW) < 50 100 0.10 ps Max.
Seconds
Phase Noise (156.25MHz
Carrier) Vdd=3.3V
@ 10 Hz offset -75 -70 dBc/Hz Note #1 & #2
@ 100 Hz offset -110 -105 dBc/Hz
@ 1,000 Hz offset -140 -135 dBc/Hz
@ 10,000 Hz offset -155 -150 dBc/Hz
@ 100,000 Hz offset -161 -160 dBc/Hz
@ 1,000,000 Hz offset -165 -160 dBc/Hz
Femto
rms Jitter (12kHz ~ 20MHz BW) < 50 100 0.10 ps Max.
Seconds
Electrical Frequency Adjustment
Control Voltage Range (Vc) 0.0 1.65 3.30 Volts
Referenced to the
Frequency Pull Range 28.00 55.00 ppm
carrier
Frequency Pull Slope Positive
Control Voltage Port Impedance 10 k
Control Port Linearity 10 %
Note #1: Maximum Phase Noise is verified on 100% of the parts at 25C 3C.
Note #2: The above specified Phase Noise & Jitter is with the oscillator device configured as a VCXO. In
XO configuration, the Phase Noise will be slightly better at each offset between 10Hz and 10 kHz,
by approximately -3dB to -5dB.
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 10.05.15
ABRACON IS ABRACON IS
ISO9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001
LLC
CECERRTIFIED TIFIED
Visit www.abracon.com for Terms and Conditions of Sale