SMD MICROPROCESSOR CRYSTAL ABLS7M RoHS / RoHS II Compliant Pb 7.0 x 4.1 x 2.3mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: Reduced footprint from ABLS (standard HC/49US package) by 50% Wireless Applications Low profile: 2.3mm max. height Home electronics Suitable for RoHS compliant reflow Computers, modems, and communications Tight stability & extended temperature options Microprocessors High reliability & Cost effective Resistance welded metal package STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Frequency Range* 12.0 40.0 MHz 12.0, 12.288, 13.5, 13.56, 14.31818, Standard Frequencies 14.7456, 16.0, 18.432, 20.0, 20.5, 24.0, MHz 24.576, 25.0, 26.0, 27.0 Fundamental (AT-cut) Operation Mode Operating Temperature 0 +70 C See options Storage Temperature -40 +125 C Frequency Tolerance +25C -50 +50 ppm See options Frequency Stability over the Operating -50 +50 ppm See options Temperature ( ref. to +25C) 60 12.000 ~ 16.000MHz Equivalent series resistance (R1) 40 16.001 ~ 30.000MHz +25C 25 30.001 ~ 40.000MHz Shunt capacitance (C0) 5 pF Standard (See options if Load capacitance (CL) 18 pF other than STD) Drive Level 50 100 W 25C3C Aging -5 +5 ppm First year Insulation Resistance 500 M 100Vdc 15V 10nw ~ 100uw 12 points Drive level dependency (DLD) Change in ESR (Maximum - Minimum) over DLD range < 30% ESR max. * Please contact Abracon for other frequencies. 2 Faraday, Suite B Irvine CA 92618 Revised: 01.06.15 ABRACON IS ABRACON IS Ph. 949.546.8000 Fax. 949.546.8001 ISO9001:2008 CECERRTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of SaleSMD MICROPROCESSOR CRYSTAL ABLS7M RoHS / RoHS II Compliant Pb 7.0 x 4.1 x 2.3mm PART IDENTIFICATIONS: (left blank if standard) ABLS7M - MHz - - - - Packaging Frequency in MHz Blank: Bulk Please specify the frequency T: Tape & Reel in MHz. e.g. 12.000MHz 14.31818MHz Freq. Stability Load Capacitance (See Table 1 for details) (pF) Blank: 50 ppm Please specify CL Freq. Tolerance (Minimum 8pF) in pF U: 10 ppm Blank: 50 ppm or S for series G: 15 ppm 1: 10 ppm X: 20 ppm Custom ESR if other Operating Temp. 7: 15 ppm W: 25 ppm than standard Blank: 0C ~ +70C 2: 20 ppm R Y: 30 ppm A: -10C ~ +60C 3: 25 ppm : Specify a value in H: 35 ppm B: -20C ~ +70C 4: 30 ppm (e.g.: R40) Q: 100 ppm C: -30C ~ +70C N: -30C ~ +85C D: -40C ~ +85C J: -40C ~ +105C K: -40C ~ +125C Table 1 Available Combinations of Operating Temp. and Freq. Stability Freq. Stability Operating Temp. U:10ppm G:15ppm X:20ppm W:25ppm Y:30ppm H:35ppm Std.:50ppm Q:100ppm A: -10C ~ +60C Std.: 0C ~ +70C B: -20C ~ +70C C: -30C ~ +70C N: -30C ~ +85C D: -40C ~ +85C J: -40C ~ +105C K: -40C ~ +125C Note: Please contact Abracon for other frequency stability and operating temperature range options. 2 Faraday, Suite B Irvine CA 92618 Revised: 01.06.15 ABRACON IS ABRACON IS Ph. 949.546.8000 Fax. 949.546.8001 ISO9001:2008 CECERRTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale