CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL
Moisture Sensitivity Level (MSL) This product is Hermetically
ABM10 RoHS/RoHS II Compliant
Pb
Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable
2.5 x 2.0 x 0.5 mm
|||||||| | | | | | | |
FEATURES:
APPLICATIONS:
2.5 x 2.0 x 0.5mm ultra miniature package
Blue-tooth, Wireless applications High density applications
Suitable for RoHS reflow profile
Computers, Modems, Microprocessors PCMCIA
Tight stability available 10ppm over -10 to +60C
Communication, Test equipment Portable radios and MP3 players
Seam sealed ceramic package assures high precision and reliability
STANDARD SPECIFICATIONS:
Parameters Minimum Typical Maximum Units Notes
Frequency Range 12.000 55.000 MHz Fundamental
Operation Mode Fundamental
Operating Temperature -10 +60 C See options
Storage Temperature -40 +125 C
Frequency Tolerance @+25C 20 ppm See options
Frequency Stability over the Operating
30 ppm See options
Temperature ( ref. to +25C)
Equivalent series resistance (R1) See table 1 below
Shunt capacitance (C0) 7 pF
Standard (See options
Load capacitance (CL) 10 pF
if other than STD)
Drive Level 10 100 W
Aging@25C3C 5 ppm First year
Insulation Resistance 500 M @ 100Vdc 15V
Table 1 standard ESR
Frequency (MHz) ESR() max.
12.000 15.999 250
16.000 19.999 150
20.000 29.999 100
30.000 55.000 70
OPTIONS & PART IDENTIFICATION: (Left blank if standard)
ABM10 - MHz - - - - -
Packaging
Blank: Bulk
Frequency in MHz
Please specify the T: 1000pcs/reel
frequency in MHz.
T3: 3000pcs/reel
e.g. 16.000MHz
Load Capacitance
Freq. Tolerance
(pF)
Custom ESR if other
1: 10 ppm
Please specify CL
than standard
in pF or S for series 7: 15 ppm
R
(8pF min.)
3: 25 ppm
: Specify a value in
4: 30 ppm
(e.g.: R40)
Operating Temp. 10 ppm 15 ppm 20 ppm 30 ppm 50 ppm 100 ppm
0C ~ +50C I10 I15 I20 I30 I50 I100
-10C ~ +60C A10 A15 A20 STD* A50 A100
-20C ~ +70C E10 E15 E20 E30 E50 E100
-30C ~ +70C C10 C15 C20 C30 C50 C100
-30C ~ +85C N10 N15 N20 N30 N50 N100
-40C ~ +85C X X D20 D30 D50 D100
-40C ~ +105C X X X X J50 J100
X X X X K50 K100
-40C ~ +125C
* Please leave blank, as this is the standard/default spec. Contact Abracon for tighter frequency stability
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15
ABRACON IS ABRACON IS
Ph. 949.546.8000 | Fax. 949.546.8001
ISO9001:2008
LLC
CECERRTIFIED TIFIED
Visit www.abracon.com for Terms and Conditions of Sale
CERTIFIEDCERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL
ABM10 RoHS/RoHS II Compliant
Pb
2.5 x 2.0 x 0.5 mm
|||||||||| | | | | |
OUTLINE DRAWING:
Note: From the top view (marking side), pin #1 is always
located at the bottom left corner of the package. This is
regardless of the location of the Chamfer, since due to
material availability, the Chamfer could be located on
pin#1, 2 or 4. Be advised that the Chamfer location has no
impact on the electrical performance of the device.
Dimensions: inches (mm)
TAPE & REEL: REFLOW PROFILE:
T: 1000pcs/reel
T3: 3000pcs/reel
Dimensions: mm
ATTENTION: Abracon Corporations products are COTS Commercial-Off-The-Shelf products; suitable for Commercial,
Need a test socket for the ABM10 Series? To view
Industrial and, where designated, Automotive Applications. Abracons products are not specifically designed for Military,
compatible PRECISION TEST & BURN-IN SOCKETS
Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure
could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating
for these parts, click here. P/N: AXS-2520-04-10
-
environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for
more information.
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15
ABRACON IS ABRACON IS
Ph. 949.546.8000 | Fax. 949.546.8001
ISO9001:2008
LLC
CECERRTIFIED TIFIED
Visit www.abracon.com for Terms and Conditions of Sale
CERTIFIED