Surface Mount WiMAX/LTE Antenna (2660MHz)
RoHS / RoHS II Compliant
Pb
AMCA92-2R660G-S1F-T
9.0 x 2.0 x 1.0mm
Moisture Sensitivity Level (MSL) MSL = 1
FEATURES:
APPLICATIONS:
2660MHz, Bandwidth 200MHz Wireless application - LTE Band 38, and WiMax bands.
Suitable for RoHS compliant reflow User Equipments (UE), e.g. dongles, modems
Gain 3.0dBi (Peak) / 1.0dBi (Average) User Equipments (EU) covering 2660MHz LTE TDD (Band 38)
VSWR <2:1 Alternative to larger PCB solution
Small size 9.0 x 2.0 x 1.0mm (0.354 x 0.078 x 0.039 inch)
Non Ground Mounting type.
Power Handling 3W Max
Matched to 50 Ohm
STANDARD SPECIFICATIONS
Maximum Ratings
Item Value
Operating Temperature Range -40C to + 85C
Storage Temperature Range
-10C ~ +40 and RH C 70% (Max.)
Electrical Characteristics
Item Spec
Frequency 2660MHz
Bandwidth 200MHz
Peak Gain 3.0 dBi typ.
Average Gain 1.0 dBi ty p
VSWR <2:1
Impedance 50 Ohm
Power Capability 3W max
PART IDENTIFICATION:
AMCA92-2R6600G-S1F-T4
Packaging
Blank: Bulk or Cut Tape
T4 : T/R 4000pcs per reel
REVISED: 05.17.2017
5101 Hidden Creek Lane Spicewood TX 78669
ABRACON IS
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale visit: ISO9001-2008
www.abracon.com CERTIFIEDSurface Mount WLAN Antenna (2660MHz)
RoHS / RoHS II Compliant
Pb
AMCA92-2R660G-S1F-T
9.0 x 2.0 x 1.0mm
OUTLINE DIMENSIONS:
Recommended Land Pattern
Series A B C D E F G H I
AMCA92 9.00.2 2.00.2 1.00.2 0.50.2 2.00.2 1.50.2 1.00.2 8.00.2 1.40.2
(Dimensions: mm)
REFLOW PROFILE:
Preheat condition: 150 ~200 /60~120C sec.
Allowed time above 217C: 60~90sec.
Max temp: 260C
Max time at max temp: 10sec.
Solder paste: Sn/3.0Ag/0.5Cu
Allowed Reflow time: 2x max
[Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly
profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and
process, and should not exceed the parameters as the Reflow profile shows.]
MANUAL SOLDERING
Pre-heating Temperature: 120C, 60 C ~ 300 sec .
Iron soldering power: Max.30W.
Pre-heating: 150 / 60 sec. C.
Soldering Tip temperature: 350 Max. C.
Soldering time: 3 sec Max.
Solder paste: Sn/3.0Ag/0.5Cu.
Max 1 times for iron soldering.
Soldering Temperature: 340C5C, 5sec max per each terminal.
[Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.]
REVISED: 05.17.2017
5101 Hidden Creek Lane Spicewood TX 78669
ABRACON IS
Phone: 512-371-6159 | Fax: 512-351-8858
ISO9001-2008
For terms and conditions of sale visit:
www.abracon.com
CERTIFIED