AOCJY7TQ-X-100.000MHz-5 Abracon

Ultra-Low Phase Noise OCXO RoHS/RoHS II Compliant AOCJY7TQ Pb ESD Sensitive 25.5 x 25.5 x 12.7mm FEATURES: APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Exceptional Close to the carrier Maximum Phase Noise of -155dBc/Hz 1kHz Cellular Infrastructure & -170dBc/Hz 10kHz offset from 100.0 MHz Carrier Radar Systems SC-Cut, High Q resonator based design Test & Measurement Equipment 100.0MHz carrier frequency GPS Tracking with precision hold-over accuracy Excellent Frequency Stability of 50.0 ppb over the operating temperature range of WiMax / WLAN -40C to +70C Precision primary frequency reference clocks Tuned Sinewave output into a 50 load Industry Standard, 25.5 x 25.5 x 12.7mm RoHS compliant & Pb free package STANDARD SPECIFICATIONS: Maximum Rating Parameters Rating Storage Temperature Range -55 to +125C Supply Voltage -0.3 to 15V Control Voltage 0 to 5V ESD, HBM/CDM/MM 2kV/1kV/200V Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes Frequency (Fc) 100.000 MHz Initial Frequency Tolerance 300 ppb ( +25C) at shipping with accuracy of 5 minutes Warm-up Time ( +25C) 100 ppb Frequency Stability Options (Ref. to Frequency +25C) -40C to +70C 50 ppb Option 5 -40C to +70C 100 ppb Option 1 -40C to +85C ppb Option 2 200 Frequency Stability vs. Supply Voltage 10 ppb Change (Vdd5%) Frequency Stability vs. Load Change 10 ppb (Load5%) Aging per Day 5 ppb (after 30 days of operation) Aging per Year 500 ppb (after 30 days of operation) Supply Voltage (Vdd) +11.4 +12.0 +12.6 V During Warming-up 4.5 W Power Consumption Steady +25C & still air 1.5 W Control Port ( Applicable for Voltage Controlled version only) Control Voltage Range (Vc) +0 +2.5 +5 V To be with-in 300 Center Control Voltage (Vc) +2.5 V ppb of Fc 25C Frequency Tuning Range 1000 ppb Tuning Slope Positive Linearity 10 % Port Impedance 50 k 2 Faraday, Suite B Irvine CA 92618 Revised: 07.21.15 ABRACON IS ABRACON IS Ph. 949.546.8000 Fax. 949.546.8001 ISO9001:2008 LLC CECERRTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale CERTIFIEDUltra-Low Phase Noise OCXO RoHS/RoHS II Compliant AOCJY7TQ Pb ESD Sensitive 25.5 x 25.5 x 12.7mm STANDARD SPECIFICATIONS: (Continued) Parameters Minimum Typical Maximum Unites Notes <-95 -93 Offset 10Hz <-126 -125 Offset 100Hz <-161 -155 Offset 1kHz -171 -170 Offset 10kHz Phase Noise* dBc/Hz (100MHz carrier frequency 25C): -173 -170 Offset 100kHz -174 -170 Offset 1MHz -173 -170 Offset 10MHz -174 -170 Offset 20MHz RMS Jitter (12kHz to 20MHz) 20 40 fs Sine Wave Output Output Level 8 dBm Harmonics -30 dBc Spurious -70 dBc Load 50 * Close to carrier phase noise is a few dB better in fixed clock configuration than the voltage controlled configuration PART IDENTIFICATION: AOCJY7TQ - - 100.000MHz - Fixed Clock or Voltage Controlled Freq. Stability over X = Fixed Clock Operating Temp. V = Voltage Controlled 5: 50ppb 1: 100ppb 2: 200ppb 2 Faraday, Suite B Irvine CA 92618 Revised: 07.21.15 ABRACON IS ABRACON IS Ph. 949.546.8000 Fax. 949.546.8001 ISO9001:2008 LLC CECERRTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale CERTIFIED