LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR
RoHS/RoHS II Compliant
AWCR-MD
Pb in ceramic, exemption (7c-I) Size Varies
||||||| | | | | | | | |
FEATURES:
APPLICATIONS:
Built-in capacitors save space & components
Microprocessor clocks. Industrial controllers.
Low cost timing solution.
Electric appliances. General timing.
Small size, Light weight
Remote controls.
ELECTRICAL CHARACTERISTICS:
Parameters Minimum Typical Maximum Units Notes
2.00 6.00
Frequency Range MHz
12.51 60.00
80 2.00 MHz ~ 2.99 MHz
Resonant Impedance (Ro) 30 3.00 MHz ~ 6.00 MHz
30 12.51 MHz ~ 60.00 MHz
24 30 36 2.00 MHz ~ 6.00 MHz
17.6 22 26.4 12.51 MHz ~ 13.00 MHz
Standard Built-in Capacitance
24 30 36 13.01 MHz ~ 20.00 MHz
pF
(C1=C2)
12 15 18 20.01 MHz ~ 25.99 MHz
4 5 6 26.00 MHz ~ 60.00 MHz
Frequency Tolerance -0.5 +0.5 %
Frequency Stability -0.3 +0.3 % -25C to +85C
Withstanding Voltage 50 Vdc DC , 1 min
D.C. Voltage 6 Vdc
Rating Voltage
A.C. Voltage 15 Vp-p.
Insulation Resistance 100 M 10Vdc, 1min
Operation Temperature -25 +85 C
Storage Temperature -55 +85 C
Aging Rate (Fosc) -0.3 0.3 % From initial value
Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13
ABRACON IS ABRACON IS
ISO9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688
CECERRTIFIED TIFIED
tel 949-546-8000 | fax 949-546-8001| www.abracon.comLEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR
RoHS/RoHS II Compliant
AWCR-MD
Pb in ceramic, exemption (7c-I) Size Varies
||||||||| | | | | | |
TEST CONDITION AND TEST CIRCUIT:
X: Ceramic Resonator
1. Input
2. Ground
3. Output
Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) unless the standard condition
(Temp: 252C, Humidity: 655% R.H.) is regulated to measure
OPTIONS AND PART IDENTIFICATION
AWCR - MD - C -
Frequency
Load Capacitance Packaging
Blank: Bulk
Contact ABRACON for
Frequency in MHz
A: AMMO package*
Built-in Capacitance
*AMMO package
options if not standard
lead length 13.5mm
Packaging:
Bulk: 500pcs/plastic bag
AMMO: 2000pcs/box
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod-
uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according
to MSL 1 requirements to maintain solderability.
Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13
ABRACON IS ABRACON IS
ISO9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688
CECERRTIFIED TIFIED
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com