LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR RoHS/RoHS II Compliant AWCR-MD Pb in ceramic, exemption (7c-I) Size Varies FEATURES: APPLICATIONS: Built-in capacitors save space & components Microprocessor clocks. Industrial controllers. Low cost timing solution. Electric appliances. General timing. Small size, Light weight Remote controls. ELECTRICAL CHARACTERISTICS: Parameters Minimum Typical Maximum Units Notes 2.00 6.00 Frequency Range MHz 12.51 60.00 80 2.00 MHz ~ 2.99 MHz Resonant Impedance (Ro) 30 3.00 MHz ~ 6.00 MHz 30 12.51 MHz ~ 60.00 MHz 24 30 36 2.00 MHz ~ 6.00 MHz 17.6 22 26.4 12.51 MHz ~ 13.00 MHz Standard Built-in Capacitance 24 30 36 13.01 MHz ~ 20.00 MHz pF (C1=C2) 12 15 18 20.01 MHz ~ 25.99 MHz 4 5 6 26.00 MHz ~ 60.00 MHz Frequency Tolerance -0.5 +0.5 % Frequency Stability -0.3 +0.3 % -25C to +85C Withstanding Voltage 50 Vdc DC , 1 min D.C. Voltage 6 Vdc Rating Voltage A.C. Voltage 15 Vp-p. Insulation Resistance 100 M 10Vdc, 1min Operation Temperature -25 +85 C Storage Temperature -55 +85 C Aging Rate (Fosc) -0.3 0.3 % From initial value Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13 ABRACON IS ABRACON IS ISO9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CECERRTIFIED TIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.comLEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR RoHS/RoHS II Compliant AWCR-MD Pb in ceramic, exemption (7c-I) Size Varies TEST CONDITION AND TEST CIRCUIT: X: Ceramic Resonator 1. Input 2. Ground 3. Output Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) unless the standard condition (Temp: 252C, Humidity: 655% R.H.) is regulated to measure OPTIONS AND PART IDENTIFICATION AWCR - MD - C - Frequency Load Capacitance Packaging Blank: Bulk Contact ABRACON for Frequency in MHz A: AMMO package* Built-in Capacitance *AMMO package options if not standard lead length 13.5mm Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod- uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13 ABRACON IS ABRACON IS ISO9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CECERRTIFIED TIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.com