BF20BA1-18.432MHZ Abracon

BB && EE SSeerriieess CCrryyssttaall HC-49/S Thru-Hole Crystal RoHS Compliant Available Wide Frequency Range AT Cut Three Lead Ground Options Frequency Range 3.200MHz to 91.730MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -55C to +125C Aging 5ppm / first year Max Shunt Capacitance 7pF Max 20pF Standard Load Capacitance (See Part Number Guide for Options) Equivalent Series Resistance See ESR Chart Mode of Operation See Chart Drive Level 1mW Max Environmental & Mechanical Detail Marking Detail Line 1: MXX.XXX Shock MIL-STD-883, Method 2002 Cond B XX.XXX = Frequency in MHz Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Line 2: SYMCCL Vibration MIL-STD-883, Method 2007, Cond A S = Internal Code Gross Leak Test MIL-STD-883, Method 1014, Cond C YM = Date Code (Year/Month) Fine Leak Test MIL-STD-883, Method 1014, Cond A2 CC = Crystal Parameters Code MSL Level 1 per IPC/JEDEC J-STD 20 L = Denotes RoHS Compliant MMD Monitor/Quartztek TAH 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales mmdcomp.com Revision: 01/17/11 J Specifications subject to change without notification. Pg 1 of 3 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 3.200MHz to 4.999MHz 200 Max Fund / AT 5.000MHz to 5.999MHz 150 Max Fund / AT 6.000MHz to 7.999MHz 120 Max Fund / AT 8.000MHz to 8.999MHz 90 Max Fund / AT 9.000MHz to 9.999MHz 80 Max Fund / AT 10.000MHz to 16.999MHz 50 Max Fund / AT 17.000MHz to 24.999MHz 40 Max Fund / AT 25.000MHz to 36.000MHz 25 Max Fund / AT rd 24.000MHz to 34.999MHz 100 Max 3 OT / AT rd 35.000MHz to 59.999MHz 80 Max 3 OT / AT rd 60.000MHz to 91.730MHz 60 Max 3 OT / AT Part Number Guide Frequency B = HC-49/US (3.5mm*) E = HC-49/US (2.5mm*) *Max Height Mode of Operation 1 = Fundamental RoHS Compliant Temperature Value Added Options 3 = 3rd Overtone Blank = Not Compliant Tolerance/Stability* Blank = No Added Options F = Is Compliant A = 50 ppm / 100 ppm I = Insulator Tab B = 30 ppm / 50 ppm L = 3rd Lead (Top of Can) C = 15 ppm / 30 ppm Load Capacitance Operating Temperature 3 = 3 Lead Base D = 10 ppm / 15 ppm S = Series A = 0C to +70C CLXXX = Cut Leads E = 50 ppm / 50 ppm 20 = 20pF (Standard) B = -20C to +70C XXX = Lead Length Code N = 10 ppm / 10 ppm XX = XXpF (8pF to 50pF) C = -40C to +85C ** * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. Mechanical Details B = 3.50 .138 MAX 12.00 .472 4.70 .185 E = 2.50 .098 MAX MIN MAX MARKING TOP SURFACE 11.20 .441 4.88 .192 MAX 0.43 .017 DIMENSIONS IN BRACKETS ARE INCHES MMD Monitor/Quartztek TAH 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales mmdcomp.com Revision: 01/17/11 J Specifications subject to change without notification. Pg 2 of 3