EA2025JA18-25.000M TR (Data Sheet downloaded on Dec 6, 2018) REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Quartz Crystal Resonator 2.0mm x 2.5mm x 0.65mm 4 Pad Ceramic Surface Mount (SMD) 25.000MHz 15ppm at 25C, 30ppm over -40C to +85C 18pF Parallel Resonant ELECTRICAL SPECIFICATIONS Nominal Frequency 25.000MHz Frequency Tolerance/Stability 15ppm at 25C, 30ppm over -40C to +85C Aging at 25C 3ppm/year Maximum Load Capacitance 18pF Parallel Resonant Shunt Capacitance 5pF Maximum Equivalent Series Resistance 80 Ohms Maximum Mode of Operation AT-Cut Fundamental Drive Level 100Watts Maximum Spurious Response -3dB Minimum (Measured from Fo to Fo +5000ppm) Storage Temperature Range -40C to +85C Insulation Resistance 500 Megaohms Minimum (Measured at 100Vdc) ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice Revision E 03/19/2018 Page 1 of 5 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200MARKING ORIENTATION EA2025JA18-25.000M TR MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 2.00 0.70 0.05 1 Crystal 0.15 2 Cover/Ground 3 Crystal 4 1 4 Cover/Ground 0.90 2.50 LINE MARKING 0.05 0.15 1 25.0 3 2 2 XXX XXX=Ecliptek Manufacturing Identifier 0.65 MAX Note: Chamfer not shown. Seam Sealed Terminal Plating Thickness: Gold (0.3 to 1.0m) over Nickel (1.27 to 8.89m). Suggested Solder Pad Layout All Dimensions in Millimeters 1.00 (X4) 1.20 (X4) Solder Land 0.50 (X4) 0.30 All Tolerances are 0.1 www.ecliptek.com Specification Subject to Change Without Notice Revision E 03/19/2018 Page 2 of 5 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200