EB16E2H2H-33.333M TR Abracon

EB16E2 Series REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.8Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD) ELECTRICAL SPECIFICATIONS Nominal Frequency 1.024MHz to 66.6666MHz Frequency Tolerance/Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration 100ppm Maximum over -20C to +70C 50ppm Maximum over -20C to +70C 25ppm Maximum over -20C to +70C 20ppm Maximum over -20C to +70C 100ppm Maximum over -40C to +85C 50ppm Maximum over -40C to +85C 25ppm Maximum over -40C to +85C 20ppm Maximum over -40C to +85C Supply Voltage 1.8Vdc 5% Input Current 3mA Maximum over Nominal Frequency of 1.024MHz to 9.999999MHz 4mA Maximum over Nominal Frequency of 10MHz to 39.999999MHz 5mA Maximum over Nominal Frequency of 40MHz to 50MHz 6mA Maximum over Nominal Frequency of 50.000001MHz to 66.6666MHz Output Voltage Logic High (V ) IOH = -4mA Oh 90% of Vdd Minimum Output Voltage Logic Low (V ) IOL = +4mA Ol 10% of Vdd Maximum Rise/Fall Time Measured at 20% to 80% of waveform 5nSec Maximum over Nominal Frequency of 1.024MHz to 24MHz 4nSec Maximum over Nominal Frequency of 24.000001MHz to 50MHz 3nSec Maximum over Nominal Frequency of 50.000001MHz to 66.6666MHz Duty Cycle Measured at 50% of Waveform 50 5(%) Load Drive Capability 15pF Maximum Output Logic Type CMOS Logic Control / Additional Output Tri-State (High Impedance) Tri-State Input Voltage (Vih and Vil) 80% of Vdd Minimum or No Connect to Enable Output, 20% of Vdd Maximum to Disable Output (High Impedance) Standby Current Disabled Output: High Impedance 10A Maximum RMS Phase Jitter Fj = 12kHz to 20MHz 1pSec Maximum Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C Revised L: 12/5/2014 Page 1 of 8 www.ecliptek.com EB16E2 Series PART NUMBERING GUIDE ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A Revised L: 12/5/2014 Page 2 of 8 www.ecliptek.com