EB19E2J2H-16.000M TR
(Data Sheet downloaded on Aug 17, 2020)
REGULATORY COMPLIANCE
2011/65 +
191 SVHC
2015/863
ITEM DESCRIPTION
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.62Vdc to 3.63Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface
Mount (SMD) 16.000MHz 25ppm over -40C to +85C
ELECTRICAL SPECIFICATIONS
Nominal Frequency 16.000MHz
Frequency Tolerance/Stability 25ppm Maximum over -40C to +85C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability
over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C,
Shock, and Vibration)
Supply Voltage 1.62Vdc to 3.63Vdc
Input Current 4mA Maximum
Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH= -4mA)
Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL= +4mA)
Rise/Fall Time 5nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle 50 5(%) (Measured at 50% of waveform)
Load Drive Capability 15pF Maximum
Output Logic Type CMOS
Pin 1 Connection Tri-State (High Impedance)
Tri-State Input Voltage (Vih and Vil) 80% of Vdd Minimum or No Connect to Enable Output, 20% of Vdd Maximum to Disable Output (High Impedance)
Standby Current 10A Maximum (Disabled Output: High Impedance)
RMS Phase Jitter 1pSec Maximum (Fj = 12kHz to 20MHz)
Start Up Time 10mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Revision A 09/29/2017 | Page 1 of 7
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EB19E2J2H-16.000M TR
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
2.50 1 Tri-State
0.75 0.10
0.15
2 Case/Ground
3 Output
1.00
2 3 4 Supply Voltage
0.10
LINE MARKING
3.20 1.20
1 E16.0
0.15 0.10
E=Ecliptek Designator
2 XXXXX
XXXXX=Ecliptek
1 4
Manufacturing Identifier
1.00
0.90 0.20
0.10
Suggested Solder Pad Layout
All Dimensions in Millimeters
1.10 (X4)
1.30 (X4)
Solder Land
1.00
(X4)
0.80
All Tolerances are 0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Revision A 09/29/2017 | Page 2 of 7
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200
MARKING
ORIENTATION